On 08/10/15 12:24 PM, Fabio Estevam wrote:
Hi Peng, On a mx6qp sabreauto I noticed that the board hangs after doing: => saveenv => reset U-Boot 2015.10-rc4-24385-ge04e21c-dirty (Oct 08 2015 - 13:08:54 -0300) CPU: Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz) CPU: Automotive temperature grade (-40C to 125C) at 38C Reset cause: POR Board: MX6Q-Sabreauto revA I2C: ready DRAM: 2 GiB PMIC: PFUZE100 ID=0x10 Flash: 32 MiB NAND: (hangs here) Any ideas?
Now, is this before or after our recent reset revert ? Regards Sinan Akman _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
