On 09/15/2015 01:12 AM, Yuan Yao wrote: > For LS1021ATWR board in order to support SATA(Gen 3), > SerDes Lan B will be connect to SATA directly. > > So SerDes 0x20 can't support 2SGMII at the same time. > In order to support two SGMII and one RGMII at the same time, > we used 0x30 to replace 0x20. > > Signed-off-by: Yuan Yao <yao.y...@freescale.com> > --- > board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg > b/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg > index 9c3e3b0..3d40528 100644 > --- a/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg > +++ b/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg > @@ -3,12 +3,12 @@ aa55aa55 01ee0100 > > #enable IFC, disable QSPI and DSPI > 0608000a 00000000 00000000 00000000 > -20000000 00407900 60040a00 21046000 > -00000000 00000000 00000000 00038000 > +30000000 00407900 60040a00 21046000 > +00000000 00000000 00000000 20038000 > 00080000 881b7340 00000000 00000000 > > #disable IFC, enable QSPI and DSPI > #0608000a 00000000 00000000 00000000 > -#20000000 00407900 60040a00 21046000 > -#00000000 00000000 00000000 00038000 > +#30000000 00407900 60040a00 21046000 > +#00000000 00000000 00000000 20038000 > #20084800 881b7340 00000000 00000000 >
This patch is superseded by Alison's patch "arm: ls1021a: Add QSPI or IFC support in SD boot". York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
