Hi Marek,
On 10/18/2015 11:35 PM, Marek Vasut wrote:
+config SYS_CONFIG_NAME
+ string "Board header file"
+ help
+ This option should contain the base name of board header file.
+ The header file include/configs/<CONFIG_SYS_CONFIG_NAME>.h
+ should be included from include/config.h.
I suspect we don't want this, since we're probing from DT. This option
should default to something like include/configs/nios2.h , no ?
This is needed as the Kconfig doesn't cover every config option yet. We
still need a per board file. But this is supposed to be removed when
Kconfig is done for every option.
Now, the legacy board header, defconfig and dts are all that we need to
add a new board to nios2. I should add a README.nios2 after I finished
the conversion of altera_tse to driver model.
endmenu
diff --git a/arch/nios2/config.mk b/arch/nios2/config.mk
index 82bd887..2abad3f 100644
--- a/arch/nios2/config.mk
+++ b/arch/nios2/config.mk
@@ -10,10 +10,11 @@ ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := nios2-elf-
endif
-CONFIG_STANDALONE_LOAD_ADDR ?= 0x02000000
+CONFIG_STANDALONE_LOAD_ADDR ?= 0xd2000000
This doesn't look like a removal of generic board ;-)
PLATFORM_CPPFLAGS += -D__NIOS2__
PLATFORM_CPPFLAGS += -G0
+PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
This doesn't look that way either, you might want to split this patch
into a series.
Yes. I will split them. Thanks a lot for your review.
Best regards,
Thomas
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
