From: Shaohui Xie <shaohui....@freescale.com>
Signed-off-by: Hou Zhiqiang <b48...@freescale.com>
Signed-off-by: Shaohui Xie <shaohui....@freescale.com>
Signed-off-by: Mingkai Hu <mingkai...@freescale.com>
Signed-off-by: Gong Qianyu <qianyu.g...@freescale.com>
---
V6:
- No change.
V5:
- No change.
V4:
- Change arch to layerscape.
V3:
- No change.
V2:
- No change.
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 12 +++
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 6 ++
.../arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c | 23 ++++
board/freescale/common/fman.c | 6 +-
board/freescale/ls1043ardb/Makefile | 1 +
board/freescale/ls1043ardb/eth.c | 77 +++++++++++++
board/freescale/ls1043ardb/ls1043ardb.c | 4 +
doc/README.fsl-dpaa | 4 +-
drivers/net/fm/Makefile | 1 +
drivers/net/fm/init.c | 10 +-
drivers/net/fm/ls1043.c | 119 +++++++++++++++++++++
include/configs/ls1043a_common.h | 12 +++
include/configs/ls1043ardb.h | 25 +++++
13 files changed, 295 insertions(+), 5 deletions(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index fe9d982..0cb0afa 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -274,6 +274,9 @@ static inline void final_mmu_setup(void)
flush_dcache_range(gd->arch.tlb_addr,
gd->arch.tlb_addr + gd->arch.tlb_size);
+#ifdef CONFIG_SYS_DPAA_FMAN
+ flush_dcache_all();
+#endif
/* point TTBR to the new table */
el = current_el();
@@ -432,6 +435,9 @@ int print_cpuinfo(void)
printf("\n Bus: %-4s MHz ",
strmhz(buf, sysinfo.freq_systembus));
printf("DDR: %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus));
+#ifdef CONFIG_SYS_DPAA_FMAN
+ printf(" FMAN: %-4s MHz", strmhz(buf, sysinfo.freq_fman[0]));
+#endif
#ifdef CONFIG_FSL_LSCH3
printf(" DP-DDR: %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus2));
#endif
@@ -468,6 +474,9 @@ int cpu_eth_init(bd_t *bis)
#ifdef CONFIG_FSL_MC_ENET
error = fsl_mc_ldpaa_init(bis);
#endif
+#ifdef CONFIG_FMAN_ENET
+ fm_standard_init(bis);
+#endif
return error;
}
@@ -484,6 +493,9 @@ int arch_early_init_r(void)
#ifdef CONFIG_SYS_HAS_SERDES
fsl_serdes_init();
#endif
+#ifdef CONFIG_FMAN_ENET
+ fman_enet_init();
+#endif
return 0;
}
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
index aa88d34..9c841c2 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
@@ -18,6 +18,12 @@
#include <asm/arch/mp.h>
#endif
+int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc)
+{
+ return fdt_setprop_string(blob, offset, "phy-connection-type",
+ phy_string_for_interface(phyc));
+}
+
#ifdef CONFIG_MP
void ft_fixup_cpu(void *blob)
{
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
index ea3723f..9d5bbe7 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
@@ -25,6 +25,9 @@ void get_sys_info(struct sys_info *sys_info)
struct fsl_ifc ifc_regs = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
u32 ccr;
#endif
+#ifdef CONFIG_SYS_DPAA_FMAN
+ u32 rcw_tmp;
+#endif
struct ccsr_clk *clk = (void *)(CONFIG_SYS_FSL_CLK_ADDR);
unsigned int cpu;
const u8 core_cplx_pll[8] = {
@@ -79,6 +82,26 @@ void get_sys_info(struct sys_info *sys_info)
#define HWA_CGA_M1_CLK_SEL 0xe0000000
#define HWA_CGA_M1_CLK_SHIFT 29
+#ifdef CONFIG_SYS_DPAA_FMAN
+ rcw_tmp = in_be32(&gur->rcwsr[7]);
+ switch ((rcw_tmp & HWA_CGA_M1_CLK_SEL) >> HWA_CGA_M1_CLK_SHIFT) {
+ case 2:
+ sys_info->freq_fman[0] = freq_c_pll[0] / 2;
+ break;
+ case 3:
+ sys_info->freq_fman[0] = freq_c_pll[0] / 3;
+ break;
+ case 6:
+ sys_info->freq_fman[0] = freq_c_pll[1] / 2;
+ break;
+ case 7:
+ sys_info->freq_fman[0] = freq_c_pll[1] / 3;
+ break;
+ default:
+ printf("Error: Unknown FMan1 clock select!\n");
+ break;
+ }
+#endif
#define HWA_CGA_M2_CLK_SEL 0x00000007
#define HWA_CGA_M2_CLK_SHIFT 0
diff --git a/board/freescale/common/fman.c b/board/freescale/common/fman.c
index 9dc5402..26cf517 100644
--- a/board/freescale/common/fman.c
+++ b/board/freescale/common/fman.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011-2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -10,7 +10,11 @@
#include <fdt_support.h>
#include <fm_eth.h>
+#ifdef CONFIG_FSL_LAYERSCAPE
+#include <asm/arch/fsl_serdes.h>
+#else
#include <asm/fsl_serdes.h>
+#endif
/*
* Given the following ...
diff --git a/board/freescale/ls1043ardb/Makefile
b/board/freescale/ls1043ardb/Makefile
index dd17e2e..5fe1cc9 100644
--- a/board/freescale/ls1043ardb/Makefile
+++ b/board/freescale/ls1043ardb/Makefile
@@ -7,3 +7,4 @@
obj-y += cpld.o
obj-y += ddr.o
obj-y += ls1043ardb.o
+obj-$(CONFIG_SYS_DPAA_FMAN) += eth.o
diff --git a/board/freescale/ls1043ardb/eth.c b/board/freescale/ls1043ardb/eth.c
new file mode 100644
index 0000000..61f2b5d
--- /dev/null
+++ b/board/freescale/ls1043ardb/eth.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <netdev.h>
+#include <fm_eth.h>
+#include <fsl_dtsec.h>
+#include <fsl_mdio.h>
+#include <malloc.h>
+
+#include "../common/fman.h"
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_FMAN_ENET
+ int i;
+ struct memac_mdio_info dtsec_mdio_info;
+ struct memac_mdio_info tgec_mdio_info;
+ struct mii_dev *dev;
+ u32 srds_s1;
+ struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+
+ srds_s1 = in_be32(&gur->rcwsr[4]) &
+ FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
+ srds_s1 >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+ dtsec_mdio_info.regs =
+ (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
+
+ dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+ /* Register the 1G MDIO bus */
+ fm_memac_mdio_init(bis, &dtsec_mdio_info);
+
+ tgec_mdio_info.regs =
+ (struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
+ tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+ /* Register the 10G MDIO bus */
+ fm_memac_mdio_init(bis, &tgec_mdio_info);
+
+ /* Set the two on-board RGMII PHY address */
+ fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR);
+
+ /* QSGMII on lane B, MAC 1/2/5/6 */
+ fm_info_set_phy_address(FM1_DTSEC1, QSGMII_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC2, QSGMII_PORT2_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC5, QSGMII_PORT3_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC6, QSGMII_PORT4_PHY_ADDR);
+
+ switch (srds_s1) {
+ case 0x1455:
+ break;
+ default:
+ printf("Invalid SerDes protocol 0x%x for LS1043ARDB\n",
+ srds_s1);
+ break;
+ }
+
+ dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
+ for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++)
+ fm_info_set_mdio(i, dev);
+
+ /* XFI on lane A, MAC 9 */
+ fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
+ dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
+ fm_info_set_mdio(FM1_10GEC1, dev);
+
+ cpu_eth_init(bis);
+#endif
+
+ return pci_eth_init(bis);
+}
diff --git a/board/freescale/ls1043ardb/ls1043ardb.c
b/board/freescale/ls1043ardb/ls1043ardb.c
index 5b7f814..6c0dd3f 100644
--- a/board/freescale/ls1043ardb/ls1043ardb.c
+++ b/board/freescale/ls1043ardb/ls1043ardb.c
@@ -13,6 +13,7 @@
#include <hwconfig.h>
#include <ahci.h>
#include <scsi.h>
+#include <fm_eth.h>
#include <fsl_csu.h>
#include <fsl_esdhc.h>
#include <fsl_ifc.h>
@@ -108,6 +109,9 @@ int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+#ifdef CONFIG_SYS_DPAA_FMAN
+ fdt_fixup_fman_ethernet(blob);
+#endif
return 0;
}
diff --git a/doc/README.fsl-dpaa b/doc/README.fsl-dpaa
index 0d8d4f6..3ef5eeb 100644
--- a/doc/README.fsl-dpaa
+++ b/doc/README.fsl-dpaa
@@ -2,9 +2,9 @@ This file documents Freescale DPAA-specific options.
FMan (Frame Manager)
- CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
- on SoCs earlier(e.g. T4240, T2080), the notation between 10GEC and MAC
as below:
+ on SoCs T4240, T2080, LS1043A, etc, the notation between 10GEC and MAC
as below:
10GEC1->MAC9, 10GEC2->MAC10, 10GEC3->MAC1, 10GEC4->MAC2
- on SoCs later(e.g. T1024, etc), the notation between 10GEC and MAC as
below:
+ on SoCs T1024, etc, the notation between 10GEC and MAC as below:
10GEC1->MAC1, 10GEC2->MAC2
so we introduce CONFIG_FSL_FM_10GEC_REGULAR_NOTATION to identify the
new SoCs on
which 10GEC enumeration is consistent with MAC enumeration.
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index d052fcb..a3c9f99 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -37,3 +37,4 @@ obj-$(CONFIG_PPC_T4160) += t4240.o
obj-$(CONFIG_PPC_T4080) += t4240.o
obj-$(CONFIG_PPC_B4420) += b4860.o
obj-$(CONFIG_PPC_B4860) += b4860.o
+obj-$(CONFIG_LS1043A) += ls1043.o
diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c
index b3ff4c5..3a1de59 100644
--- a/drivers/net/fm/init.c
+++ b/drivers/net/fm/init.c
@@ -1,13 +1,17 @@
/*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011-2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <errno.h>
#include <common.h>
#include <asm/io.h>
-#include <asm/fsl_serdes.h>
#include <fsl_mdio.h>
+#ifdef CONFIG_FSL_LAYERSCAPE
+#include <asm/arch/fsl_serdes.h>
+#else
+#include <asm/fsl_serdes.h>
+#endif
#include "fm.h"
@@ -153,7 +157,9 @@ void fm_disable_port(enum fm_port port)
return;
fm_info[i].enabled = 0;
+#ifndef CONFIG_SYS_FMAN_V3
fman_disable_port(port);
+#endif
}
void fm_enable_port(enum fm_port port)
diff --git a/drivers/net/fm/ls1043.c b/drivers/net/fm/ls1043.c
new file mode 100644
index 0000000..cf2cc95
--- /dev/null
+++ b/drivers/net/fm/ls1043.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <asm/arch/fsl_serdes.h>
+
+#define FSL_CHASSIS2_RCWSR13_EC1 0xe0000000 /* bits 416..418 */
+#define FSL_CHASSIS2_RCWSR13_EC1_DTSEC3_RGMII 0x00000000
+#define FSL_CHASSIS2_RCWSR13_EC1_GPIO 0x20000000
+#define FSL_CHASSIS2_RCWSR13_EC1_FTM 0xa0000000
+#define FSL_CHASSIS2_RCWSR13_EC2 0x1c000000 /* bits 419..421 */
+#define FSL_CHASSIS2_RCWSR13_EC2_DTSEC4_RGMII 0x00000000
+#define FSL_CHASSIS2_RCWSR13_EC2_GPIO 0x04000000
+#define FSL_CHASSIS2_RCWSR13_EC2_1588 0x08000000
+#define FSL_CHASSIS2_RCWSR13_EC2_FTM 0x14000000
+
+u32 port_to_devdisr[] = {
+ [FM1_DTSEC1] = FSL_CHASSIS2_DEVDISR2_DTSEC1_1,
+ [FM1_DTSEC2] = FSL_CHASSIS2_DEVDISR2_DTSEC1_2,
+ [FM1_DTSEC3] = FSL_CHASSIS2_DEVDISR2_DTSEC1_3,
+ [FM1_DTSEC4] = FSL_CHASSIS2_DEVDISR2_DTSEC1_4,
+ [FM1_DTSEC5] = FSL_CHASSIS2_DEVDISR2_DTSEC1_5,
+ [FM1_DTSEC6] = FSL_CHASSIS2_DEVDISR2_DTSEC1_6,
+ [FM1_DTSEC9] = FSL_CHASSIS2_DEVDISR2_DTSEC1_9,
+ [FM1_DTSEC10] = FSL_CHASSIS2_DEVDISR2_DTSEC1_10,
+ [FM1_10GEC1] = FSL_CHASSIS2_DEVDISR2_10GEC1_1,
+ [FM1_10GEC2] = FSL_CHASSIS2_DEVDISR2_10GEC1_2,
+ [FM1_10GEC3] = FSL_CHASSIS2_DEVDISR2_10GEC1_3,
+ [FM1_10GEC4] = FSL_CHASSIS2_DEVDISR2_10GEC1_4,
+};
+
+static int is_device_disabled(enum fm_port port)
+{
+ struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 devdisr2 = in_be32(&gur->devdisr2);
+
+ return port_to_devdisr[port] & devdisr2;
+}
+
+void fman_disable_port(enum fm_port port)
+{
+ struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+
+ setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
+}
+
+phy_interface_t fman_port_enet_if(enum fm_port port)
+{
+ struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
+
+ if (is_device_disabled(port)) {
+ printf("%s:%d: port(%d) is disabled\n", __func__,
+ __LINE__, port);
+ return PHY_INTERFACE_MODE_NONE;
+ }
+
+ if ((port == FM1_10GEC1) && (is_serdes_configured(XFI_FM1_MAC9)))
+ return PHY_INTERFACE_MODE_XGMII;
+
+ if ((port == FM1_DTSEC9) && (is_serdes_configured(XFI_FM1_MAC9)))
+ return PHY_INTERFACE_MODE_NONE;
+
+ if (port == FM1_DTSEC3)
+ if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC1) ==
+ FSL_CHASSIS2_RCWSR13_EC1_DTSEC3_RGMII) {
+ printf("%s:%d: port(FM1_DTSEC3) is OK\n",
+ __func__, __LINE__);
+ return PHY_INTERFACE_MODE_RGMII;
+ }
+ if (port == FM1_DTSEC4)
+ if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC2) ==
+ FSL_CHASSIS2_RCWSR13_EC2_DTSEC4_RGMII) {
+ printf("%s:%d: port(FM1_DTSEC4) is OK\n",
+ __func__, __LINE__);
+ return PHY_INTERFACE_MODE_RGMII;
+ }
+
+ /* handle SGMII */
+ switch (port) {
+ case FM1_DTSEC1:
+ case FM1_DTSEC2:
+ if ((port == FM1_DTSEC2) &&
+ is_serdes_configured(SGMII_2500_FM1_DTSEC2))
+ return PHY_INTERFACE_MODE_SGMII_2500;
+ case FM1_DTSEC5:
+ case FM1_DTSEC6:
+ case FM1_DTSEC9:
+ if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1))
+ return PHY_INTERFACE_MODE_SGMII;
+ else if ((port == FM1_DTSEC9) &&
+ is_serdes_configured(SGMII_2500_FM1_DTSEC9))
+ return PHY_INTERFACE_MODE_SGMII_2500;
+ break;
+ default:
+ break;
+ }
+
+ /* handle QSGMII */
+ switch (port) {
+ case FM1_DTSEC1:
+ case FM1_DTSEC2:
+ case FM1_DTSEC5:
+ case FM1_DTSEC6:
+ /* only MAC 1,2,5,6 available for QSGMII */
+ if (is_serdes_configured(QSGMII_FM1_A))
+ return PHY_INTERFACE_MODE_QSGMII;
+ break;
+ default:
+ break;
+ }
+
+ return PHY_INTERFACE_MODE_NONE;
+}
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 222cb43..557b19c 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -155,6 +155,18 @@
#define CONFIG_CMD_ENV
#define CONFIG_CMD_PING
+/* FMan ucode */
+#define CONFIG_SYS_DPAA_FMAN
+#ifdef CONFIG_SYS_DPAA_FMAN
+#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
+
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
+/* FMan fireware Pre-load address */
+#define CONFIG_SYS_FMAN_FW_ADDR 0x60300000
+#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
+#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
+#endif
+
/* Miscellaneous configurable options */
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
#define CONFIG_ARCH_EARLY_INIT_R
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 8ac752e..c776640 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -234,4 +234,29 @@
#define CONFIG_ENV_SIZE 0x20000
#endif
+/* FMan */
+#ifdef CONFIG_SYS_DPAA_FMAN
+#define CONFIG_FMAN_ENET
+#define CONFIG_CMD_MII
+#define CONFIG_PHYLIB
+#define CONFIG_PHYLIB_10G
+#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
+
+#define CONFIG_PHY_VITESSE
+#define CONFIG_PHY_REALTEK
+#define CONFIG_PHY_AQUANTIA
+
+#define RGMII_PHY1_ADDR 0x1
+#define RGMII_PHY2_ADDR 0x2
+
+#define QSGMII_PORT1_PHY_ADDR 0x4
+#define QSGMII_PORT2_PHY_ADDR 0x5
+#define QSGMII_PORT3_PHY_ADDR 0x6
+#define QSGMII_PORT4_PHY_ADDR 0x7
+
+#define FM1_10GEC1_PHY_ADDR 0x1
+
+#define CONFIG_ETHPRIME "FM1@DTSEC3"
+#endif
+
#endif /* __LS1043ARDB_H__ */
--
2.1.0.27.g96db324
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
