> -----Original Message----- > From: Jagan Teki [mailto:jt...@openedev.com] > Sent: Saturday, October 24, 2015 9:09 AM > To: u-boot@lists.denx.de > Cc: Jagan Teki; Siva Durga Prasad Paladugu; Michal Simek > Subject: [PATCH v5 01/23] spi: zynq_[q]spi: Use BIT macro > > Used BIT macro on zynq_spi.c and zynq_qspi.c > > :%s/(1 << nr)/BIT(nr)/g > where nr = 0, 1, 2 .... 31 > > Cc: Siva Durga Prasad Paladugu <siva...@xilinx.com> > Cc: Michal Simek <michal.si...@xilinx.com> > Reviewed-by: Tom Rini <tr...@konsulko.com> > Signed-off-by: Jagan Teki <jt...@openedev.com> Acked-by: Siva Durga Prasad Paladugu <siva...@xilinx.com> > --- > drivers/spi/zynq_qspi.c | 20 ++++++++++---------- drivers/spi/zynq_spi.c | > 16 ++++++++-------- > 2 files changed, 18 insertions(+), 18 deletions(-) > > diff --git a/drivers/spi/zynq_qspi.c b/drivers/spi/zynq_qspi.c index > 8aa61d7..dd530a1 100644 > --- a/drivers/spi/zynq_qspi.c > +++ b/drivers/spi/zynq_qspi.c > @@ -16,20 +16,20 @@ > DECLARE_GLOBAL_DATA_PTR; > > /* zynq qspi register bit masks ZYNQ_QSPI_<REG>_<BIT>_MASK */ > -#define ZYNQ_QSPI_CR_IFMODE_MASK (1 << 31) /* Flash > intrface mode*/ > -#define ZYNQ_QSPI_CR_MSA_MASK (1 << 15) /* Manual > start enb */ > -#define ZYNQ_QSPI_CR_MCS_MASK (1 << 14) /* Manual > chip select */ > -#define ZYNQ_QSPI_CR_PCS_MASK (1 << 10) /* Peri chip > select */ > +#define ZYNQ_QSPI_CR_IFMODE_MASK BIT(31) /* Flash intrface > mode*/ > +#define ZYNQ_QSPI_CR_MSA_MASK BIT(15) /* Manual start enb > */ > +#define ZYNQ_QSPI_CR_MCS_MASK BIT(14) /* Manual chip select > */ > +#define ZYNQ_QSPI_CR_PCS_MASK BIT(10) /* Peri chip select */ > #define ZYNQ_QSPI_CR_FW_MASK (0x3 << 6) /* FIFO width > */ > #define ZYNQ_QSPI_CR_SS_MASK (0xF << 10) /* Slave > Select */ > #define ZYNQ_QSPI_CR_BAUD_MASK (0x7 << 3) /* Baud rate > div */ > -#define ZYNQ_QSPI_CR_CPHA_MASK (1 << 2) /* Clock phase > */ > -#define ZYNQ_QSPI_CR_CPOL_MASK (1 << 1) /* Clock > polarity */ > -#define ZYNQ_QSPI_CR_MSTREN_MASK (1 << 0) /* Mode select */ > -#define ZYNQ_QSPI_IXR_RXNEMPTY_MASK (1 << 4) /* > RX_FIFO_not_empty */ > -#define ZYNQ_QSPI_IXR_TXOW_MASK (1 << 2) /* > TX_FIFO_not_full */ > +#define ZYNQ_QSPI_CR_CPHA_MASK BIT(2) /* Clock > phase */ > +#define ZYNQ_QSPI_CR_CPOL_MASK BIT(1) /* Clock > polarity */ > +#define ZYNQ_QSPI_CR_MSTREN_MASK BIT(0) /* Mode select */ > +#define ZYNQ_QSPI_IXR_RXNEMPTY_MASK BIT(4) /* > RX_FIFO_not_empty */ > +#define ZYNQ_QSPI_IXR_TXOW_MASK BIT(2) /* > TX_FIFO_not_full */ > #define ZYNQ_QSPI_IXR_ALL_MASK 0x7F /* All IXR bits > */ > -#define ZYNQ_QSPI_ENR_SPI_EN_MASK (1 << 0) /* SPI Enable */ > +#define ZYNQ_QSPI_ENR_SPI_EN_MASK BIT(0) /* SPI Enable */ > > /* zynq qspi Transmit Data Register */ > #define ZYNQ_QSPI_TXD_00_00_OFFSET 0x1C /* Transmit 4-byte > inst */ > diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c index > 65a9633..92e5712 100644 > --- a/drivers/spi/zynq_spi.c > +++ b/drivers/spi/zynq_spi.c > @@ -20,17 +20,17 @@ > DECLARE_GLOBAL_DATA_PTR; > > /* zynq spi register bit masks ZYNQ_SPI_<REG>_<BIT>_MASK */ > -#define ZYNQ_SPI_CR_MSA_MASK (1 << 15) /* Manual > start enb */ > -#define ZYNQ_SPI_CR_MCS_MASK (1 << 14) /* Manual > chip select */ > +#define ZYNQ_SPI_CR_MSA_MASK BIT(15) /* Manual start enb > */ > +#define ZYNQ_SPI_CR_MCS_MASK BIT(14) /* Manual chip select > */ > #define ZYNQ_SPI_CR_CS_MASK (0xF << 10) /* Chip select > */ > #define ZYNQ_SPI_CR_BAUD_MASK (0x7 << 3) /* Baud rate > div */ > -#define ZYNQ_SPI_CR_CPHA_MASK (1 << 2) /* Clock phase > */ > -#define ZYNQ_SPI_CR_CPOL_MASK (1 << 1) /* Clock > polarity */ > -#define ZYNQ_SPI_CR_MSTREN_MASK (1 << 0) /* Mode > select */ > -#define ZYNQ_SPI_IXR_RXNEMPTY_MASK (1 << 4) /* > RX_FIFO_not_empty */ > -#define ZYNQ_SPI_IXR_TXOW_MASK (1 << 2) /* > TX_FIFO_not_full > */ > +#define ZYNQ_SPI_CR_CPHA_MASK BIT(2) /* Clock phase */ > +#define ZYNQ_SPI_CR_CPOL_MASK BIT(1) /* Clock polarity */ > +#define ZYNQ_SPI_CR_MSTREN_MASK BIT(0) /* Mode > select */ > +#define ZYNQ_SPI_IXR_RXNEMPTY_MASK BIT(4) /* > RX_FIFO_not_empty */ > +#define ZYNQ_SPI_IXR_TXOW_MASK BIT(2) /* > TX_FIFO_not_full */ > #define ZYNQ_SPI_IXR_ALL_MASK 0x7F /* All IXR bits > */ > -#define ZYNQ_SPI_ENR_SPI_EN_MASK (1 << 0) /* SPI Enable */ > +#define ZYNQ_SPI_ENR_SPI_EN_MASK BIT(0) /* SPI Enable */ > > #define ZYNQ_SPI_CR_BAUD_MAX 8 /* Baud rate divisor > max val */ > #define ZYNQ_SPI_CR_BAUD_SHIFT 3 /* Baud rate divisor > shift */ > -- > 1.9.1
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
