Hi Wolfgang,

> Dear Axel Beierlein,
>
> In message <1248471861-8085-1-git-send-email-beierl...@goetting.de> you wrote:
>> Signed-off-by: Axel Beierlein <beierl...@goetting.de>
>> ---
>>  Makefile                    |    7 +++++++
>>  board/tqc/tqm5200/tqm5200.c |    9 ++++++++-
>>  include/configs/TQM5200.h   |   33 ++++++++++++++++++++++++++-------
>>  3 files changed, 41 insertions(+), 8 deletions(-)
>> 
>> diff --git a/Makefile b/Makefile
>> index 2a06440..7f197dd 100644
>> --- a/Makefile
>> +++ b/Makefile
>> @@ -764,6 +764,7 @@ Total5200_Rev2_lowboot_config:   unconfig
>>              }
>>      @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
>>  
>> +HG43630_config \
>>  cam5200_config \
>>  cam5200_niosflash_config \
>>  fo300_config \
>
> Please use a lower case board name, and keep list sorted.
>
>> @@ -808,6 +809,12 @@ TQM5200_STK100_config:  unconfig
>>      @[ -z "$(findstring HIGHBOOT,$@)" ] || \
>>              { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp 
>> ; \
>>              }
>> +    @[ -z "$(findstring HG43630,$@)" ] || \
>> +            { echo "#define CONFIG_HG43630" >>$(obj)include/config.h ; \
>> +              echo "#define CONFIG_TQM5200S"        
>> >>$(obj)include/config.h ; \
>> +              echo "#define CONFIG_TQM5200_B"       
>> >>$(obj)include/config.h ; \
>> +              $(XECHO) "... TQM5200S on Goetting HG43630 Board" ; \
>> +            }
>>      @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc
>
> Please don't add board specific configuration to the top level
> Makefile; do thi sin your board config file instead.

Can you explain what you want to see here?  The board is based on a
tqm5200 module, so he actually does not want to copy his own config
file.  Personally I think this solution to be ok, can you explain what
you don't like about it?

Cheers
  Detlev

-- 
The success of PCs is in large part due to the fact that, by making all
hardware equivalent, good software enabled bad hardware. (Ugly)
                                    -- Rob Pike
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: d...@denx.de
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to