Hi, Looks good to me.
Acked-by: Jaehoon Chung <jh80.ch...@samsung.com> Best Regards, Jaehoon Chung On 10/28/2015 11:41 PM, Przemyslaw Marczak wrote: > There are 8 pins for SD card in Exynos, but the MUX was configured > only for 7, since the one was used for card detection. > This caused the pin's pull wrong configuration. > > This commit fixes this and the card detect can work properly, > after call this function. > > Tested-on: Odroid U3 and Odroid X2. > > Signed-off-by: Przemyslaw Marczak <p.marc...@samsung.com> > Cc: Guillaume GARDET <guillaume.gar...@free.fr> > Cc: Lukasz Majewski <l.majew...@samsung.com> > Cc: Jaehoon Chung <jh80.ch...@samsung.com> > Cc: Minkyu Kang <mk7.k...@samsung.com> > Cc: Simon Glass <s...@chromium.org> > --- > arch/arm/mach-exynos/pinmux.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/mach-exynos/pinmux.c b/arch/arm/mach-exynos/pinmux.c > index 179b294..925bd0a 100644 > --- a/arch/arm/mach-exynos/pinmux.c > +++ b/arch/arm/mach-exynos/pinmux.c > @@ -737,10 +737,10 @@ static int exynos4x12_mmc_config(int peripheral, int > flags) > return -1; > } > for (i = start; i < (start + 7); i++) { > + gpio_set_pull(i, S5P_GPIO_PULL_NONE); > if (i == (start + 2)) > continue; > gpio_cfg_pin(i, func); > - gpio_set_pull(i, S5P_GPIO_PULL_NONE); > gpio_set_drv(i, S5P_GPIO_DRV_4X); > } > if (flags & PINMUX_FLAG_8BIT_MODE) { > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot