Dear David Hunter, In message <d47469d30908011215k51f1ff58j47892a3e86c40...@mail.gmail.com> you wrote: > > That raises a question. I'm porting U-Boot to our Marvell PXA310-based > hardware. (I'm very new to contributing to an open source project > using git, so I apologize in advance for the mistakes I'll make out of > ignorance.) I have a few patches queued which will attempt to clean up
Please see http://www.denx.de/wiki/U-Boot/Patches for details. > and improve PXA300/310/320 support -- register definitions for now, > but later driver stuff as I dive into Ethernet, etc.. Which branch > should I be basing my work on: u-boot, -arm, or -pxa? Normally please use the "master" branch of the mainline U-Boot git repository (git://git.denx.de/u-boot.git) as reference, unless (usually late in a release cycle) there has been an announcement to use the "next" branch of this repository instead. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de In English, every word can be verbed. Would that it were so in our programming languages. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot