The call to pci_run_vga_bios() is not needed as this is handled
in the vesa_fb driver.
Signed-off-by: Bin Meng <bmeng...@gmail.com>
---
Changes in v2: None
arch/x86/cpu/qemu/pci.c | 19 +------------------
1 file changed, 1 insertion(+), 18 deletions(-)
diff --git a/arch/x86/cpu/qemu/pci.c b/arch/x86/cpu/qemu/pci.c
index 2e94456..8515d10 100644
--- a/arch/x86/cpu/qemu/pci.c
+++ b/arch/x86/cpu/qemu/pci.c
@@ -6,7 +6,6 @@
#include <common.h>
#include <pci.h>
-#include <pci_rom.h>
#include <asm/pci.h>
#include <asm/arch/device.h>
#include <asm/arch/qemu.h>
@@ -51,11 +50,8 @@ void board_pci_setup_hose(struct pci_controller *hose)
int board_pci_post_scan(struct pci_controller *hose)
{
- int ret = 0;
u16 device, xbcs;
int pam, i;
- pci_dev_t vga;
- ulong start;
/*
* i440FX and Q35 chipset have different PAM register offset, but with
@@ -96,20 +92,7 @@ int board_pci_post_scan(struct pci_controller *hose)
CONFIG_PCIE_ECAM_BASE | BAR_EN);
}
- /*
- * QEMU emulated graphic card shows in the PCI configuration space with
- * PCI vendor id and device id as an artificial pair 0x1234:0x1111.
- * It is on PCI bus 0, function 0, but device number is not consistent
- * for the two x86 targets it supports. For i440FX and PIIX chipset
- * board, it shows as device 2, while for Q35 and ICH9 chipset board,
- * it shows as device 1.
- */
- vga = i440fx ? I440FX_VGA : Q35_VGA;
- start = get_timer(0);
- ret = pci_run_vga_bios(vga, NULL, PCI_ROM_USE_NATIVE);
- debug("BIOS ran in %lums\n", get_timer(start));
-
- return ret;
+ return 0;
}
#ifdef CONFIG_GENERATE_MP_TABLE
--
1.8.2.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
