On Mon, Aug 03, 2009 at 08:20:41PM +0530, Rupesh Kumar wrote: > Hi, > I used latest version of u-boot (U-Boot 2009.08-rc1) for NAND booting of > my board. Still, it didn't work. > Board starts booting and then says read failed and hangs there. It prints > following message on console > > "NAND boot... read failed (ltesr)"
You most likely got an uncorrectable ECC error reading the data; did you also program the image from current u-boot, or are you trying to boot an image written by the old u-boot? There could be a mismatch on ECC layout. Is your board file overriding FMR with CONFIG_FSL_ELBC_FMR (it should not)? > I am using 2.1 silicon MPC8313 based custom board with large page NAND. > > Can any one tell how shall i proceed for booting successfully from large > page NAND ? Debugging. :-) -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot