From: Bagavathiannan Palanisamy <bagavathiannan.palanis...@keymile.com>
Setting dip_switch 3 and 4 also will run bootloader in COGE3 and COGE6
It is required remove local mgmt IP address, when DIP Switch PIN3 is
enabled. DIP Switch 4 also enabled to avoid u-boot update in future
for DIP switch enhancements.
Signed-off-by: Bagavathiannan Palanisamy <bagavathiannan.palanis...@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longch...@keymile.com>
---
Changes in v2: None
board/keymile/km82xx/km82xx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c
index 01a3c20..9e285ec 100644
--- a/board/keymile/km82xx/km82xx.c
+++ b/board/keymile/km82xx/km82xx.c
@@ -329,8 +329,8 @@ int last_stage_init(void)
dip_switch = in_8(&base->mswitch);
dip_switch &= BFTICU_DIPSWITCH_MASK;
- /* dip switch 'full reset' or 'db erase' */
- if (dip_switch & 0x1 || dip_switch & 0x2) {
+ /* dip switch 'full reset' or 'db erase' or 'Local mgmt IP' or any */
+ if (dip_switch != 0) {
/* start bootloader */
puts("DIP: Enabled\n");
setenv("actual_bank", "0");
--
1.8.3.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
