Dear Alemao,
In message <d970ff420908060500j77fb4ea3kcd93f61126920...@mail.gmail.com> you
wrote:
>
> Im having problems porting u-boot-2009.03 to a MPC8541 board.
>
> In u-boot-1.2.0, if I use TEXT_BASE = 0xfff00000, u-boot.bin is
> created with 1MB size.
Sounds like a waste of flash memoory ?
> But in u-boot-2009.03 it's created with only 516kB.
Looks incorrect.
> Do I have to set TEXT_BASE with the exact u-boot.bin size?
No.
> Or am I missing something?
Obviously yes.
But as you share no relevant information, it's impossible even to
guess what might be wrong in your configuration.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
The moral of the story is: "Don't stop to tighten your shoe laces
during the Olympics 100m finals".
- Kevin Jones in <dejo68....@bri.hp.com>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
