On Mon, 2015-11-23 at 14:47 +0800, Chen-Yu Tsai wrote: > Hi, > > On Sun, Nov 22, 2015 at 11:40 PM, Hans de Goede <hdego...@redhat.com> > wrote: > > Hi, > > > > On 22-11-15 15:14, Chen-Yu Tsai wrote: > >> > >> On Sat, Nov 21, 2015 at 11:48 PM, Ian Campbell < > ijc+ub...@hellion.org.uk> > >> wrote: > >>> > >>> On Fri, 2015-11-20 at 19:32 +0100, Hans de Goede wrote: > >>>> > >>>> According to the datasheets the max speed of AHB1 is 276 MHz, so > >>>> setting it to PLL6 / 3 which gives us 200MHz everywhere is fine, > >>>> and gives us a nice speed-up in certain workloads. > >>>> > >>>> Suggested-by: Chen-Yu Tsai <w...@csie.org> > >>>> Signed-off-by: Hans de Goede <hdego...@redhat.com> > >>> > >>> > >>> I suppose you've tested this on at least one such board? In that > case: > >>> Acked-by: Ian Campbell <i...@hellion.org.uk> > >> > >> > >> I've tested this on some of my boards. It works fine on my > Hummingbird A31 > >> and A23 Q8 tablet. However my Sinlinx SinA33 is giving me kernel > Oops > >> which > >> I haven't looked into yet. > > > > > > Works for me on a q8 A33 tablet. But lets investigate your oops > before > > including > > this in the next pull-req. Thanks for the testing! > > I retested it with a proper clean build, and it works now. No idea > what > the oops was about. > > Also tested on my Sinlinx SinA31s. So it now works on all my sun6i > generation > boards. > > Tested-by: Chen-Yu Tsai <w...@csie.org>
Good enough for me, my original Ack stands... > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot