On 11/26/2015 10:10 AM, Chin Liang See wrote:
> socfpga_dw_mmc driver will obtain the drvsel and
> smplsel value from device tree instead of definition
> in config header file.
>
> Signed-off-by: Chin Liang See <cl...@altera.com>
> Cc: Dinh Nguyen <dingu...@opensource.altera.com>
> Cc: Dinh Nguyen <dinh.li...@gmail.com>
> Cc: Pavel Machek <pa...@denx.de>
> Cc: Marek Vasut <ma...@denx.de>
> Cc: Stefan Roese <s...@denx.de>
> Cc: Pantelis Antoniou <pantelis.anton...@konsulko.com>
> Cc: Simon Glass <s...@chromium.org>
> Cc: Jaehoon Chung <jh80.ch...@samsung.com>
> ---
> Changes for v2
> - Put default value for drvsel to 3 in case node in DT missing
> - Remove unnecessary ad-hoc vairable
> - Free up first calloc if second calloc failed
> ---
> arch/arm/dts/socfpga_cyclone5.dtsi | 2 ++
> drivers/mmc/socfpga_dw_mmc.c | 22 ++++++++++++++++++++--
> include/configs/socfpga_common.h | 2 --
> 3 files changed, 22 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/dts/socfpga_cyclone5.dtsi
> b/arch/arm/dts/socfpga_cyclone5.dtsi
> index de36209..040b236 100644
> --- a/arch/arm/dts/socfpga_cyclone5.dtsi
> +++ b/arch/arm/dts/socfpga_cyclone5.dtsi
> @@ -25,6 +25,8 @@
> bus-width = <4>;
> cap-mmc-highspeed;
> cap-sd-highspeed;
> + drvsel = <3>;
> + smplsel = <0>;
> };
>
> sysmgr@ffd08000 {
> diff --git a/drivers/mmc/socfpga_dw_mmc.c b/drivers/mmc/socfpga_dw_mmc.c
> index 8076761..38eb783 100644
> --- a/drivers/mmc/socfpga_dw_mmc.c
> +++ b/drivers/mmc/socfpga_dw_mmc.c
> @@ -19,18 +19,25 @@ static const struct socfpga_clock_manager
> *clock_manager_base =
> static const struct socfpga_system_manager *system_manager_base =
> (void *)SOCFPGA_SYSMGR_ADDRESS;
>
> +/* socfpga implmentation specific drver private data */
> +struct dwmci_socfpga_priv_data {
> + unsigned int drvsel;
> + unsigned int smplsel;
> +};
> +
> static void socfpga_dwmci_clksel(struct dwmci_host *host)
> {
> unsigned int drvsel;
> unsigned int smplsel;
> + struct dwmci_socfpga_priv_data *priv = host->priv;
>
> /* Disable SDMMC clock. */
> clrbits_le32(&clock_manager_base->per_pll.en,
> CLKMGR_PERPLLGRP_EN_SDMMCCLK_MASK);
>
> /* Configures drv_sel and smpl_sel */
> - drvsel = CONFIG_SOCFPGA_DWMMC_DRVSEL;
> - smplsel = CONFIG_SOCFPGA_DWMMC_SMPSEL;
> + drvsel = priv->drvsel;
> + smplsel = priv->smplsel;
I found that drvsel and smplsel are used at only here.
I think they should be removed.
(priv->drvsel/smplse don't need to assign to drvsel/smplsel.)
how about?
Best Regards,
Jaehoon Chung
>
> debug("%s: drvsel %d smplsel %d\n", __func__, drvsel, smplsel);
> writel(SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel),
> @@ -50,6 +57,7 @@ static int socfpga_dwmci_of_probe(const void *blob, int
> node, const int idx)
> const unsigned long clk = cm_get_mmc_controller_clk_hz();
>
> struct dwmci_host *host;
> + struct dwmci_socfpga_priv_data *priv;
> fdt_addr_t reg_base;
> int bus_width, fifo_depth;
>
> @@ -83,6 +91,13 @@ static int socfpga_dwmci_of_probe(const void *blob, int
> node, const int idx)
> if (!host)
> return -ENOMEM;
>
> + /* Allocate the priv */
> + priv = calloc(1, sizeof(*priv));
> + if (!priv) {
> + free(host);
> + return -ENOMEM;
> + }
> +
> host->name = "SOCFPGA DWMMC";
> host->ioaddr = (void *)reg_base;
> host->buswidth = bus_width;
> @@ -92,6 +107,9 @@ static int socfpga_dwmci_of_probe(const void *blob, int
> node, const int idx)
> host->bus_hz = clk;
> host->fifoth_val = MSIZE(0x2) |
> RX_WMARK(fifo_depth / 2 - 1) | TX_WMARK(fifo_depth / 2);
> + priv->drvsel = fdtdec_get_uint(blob, node, "drvsel", 3);
> + priv->smplsel = fdtdec_get_uint(blob, node, "smplsel", 0);
> + host->priv = priv;
>
> return add_dwmci(host, host->bus_hz, 400000);
> }
> diff --git a/include/configs/socfpga_common.h
> b/include/configs/socfpga_common.h
> index f6808b5..b661cc2 100644
> --- a/include/configs/socfpga_common.h
> +++ b/include/configs/socfpga_common.h
> @@ -153,8 +153,6 @@
> #define CONFIG_DWMMC
> #define CONFIG_SOCFPGA_DWMMC
> #define CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH 1024
> -#define CONFIG_SOCFPGA_DWMMC_DRVSEL 3
> -#define CONFIG_SOCFPGA_DWMMC_SMPSEL 0
> /* FIXME */
> /* using smaller max blk cnt to avoid flooding the limited stack we have */
> #define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 /* FIXME -- SPL only? */
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
