> -----Original Message----- > From: u-boot-boun...@lists.denx.de > [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Alessandro Rubini > Sent: Friday, August 07, 2009 4:00 PM > To: w...@denx.de > Cc: u-boot@lists.denx.de > Subject: Re: [U-Boot] Kirkwood gpio (was: timeout calculation > underflow if imprecise 1kHz timer: fix) > > > I'd prefer "tout = DIV_ROUND_UP(tout*CONFIG_SYS_HZ, 1000);" > > Ok for me. > > BTW: Looking for DIV_ROUND_UP, I found that it's defined in > ./include/asm/arch-kirkwood/gpio.h as well. I was checking > whether it can be removed, but it looks like nobody is using > the driver. I think at least heiko is the customer for this stuff. Copying Heiko, Unfortunately I do not have use case for this :-( But in near future I will have it. Dear Heiko, can you pls check mainlined stuff?
Regards.. Prafulla . . > > tornado$ grep -r CONFIG_KIRKWOOD_GPIO . > ./drivers/gpio/Makefile:COBJS-$(CONFIG_KIRKWOOD_GPIO) += > kw_gpio.o > > The header and C file were added on Jun 29th, but there's not > user yet. > It has been tested by Heiko on the Suen3, but it's not mainline. > And even that patch doesn't define CONFIG_KIRKWOOD_GPIO . > > /alessandro > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot