Select PHYLIB in drivers/net/Kconfig. And remove CONFIG_PHYLIB
from legacy board header files.
This fixed the warnings when both ALTERA_TSE and ETH_DESIGNWARE
are selected.
Signed-off-by: Thomas Chou <tho...@wytron.com.tw>
Reported-by: Pavel Machek <pa...@denx.de>
Acked-by: Chin Liang See <cl...@altera.com>
Acked-by: Pavel Machek <pa...@denx.de>
Tested-by: Pavel Machek <pa...@denx.de>
Reviewed-by: Bin Meng <bmeng...@gmail.com>
---
v2
remove the PHYLIB check as suggested by Marek.
drivers/net/Kconfig | 1 +
drivers/net/designware.c | 4 ----
include/configs/axs101.h | 1 -
include/configs/bf609-ezkit.h | 1 -
include/configs/galileo.h | 1 -
include/configs/socfpga_common.h | 1 -
include/configs/spear-common.h | 1 -
include/configs/stv0991.h | 1 -
include/configs/sunxi-common.h | 1 -
include/configs/tb100.h | 1 -
include/configs/x600.h | 1 -
11 files changed, 1 insertion(+), 13 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a03a95d..4b04d09 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -88,6 +88,7 @@ config ETH_SANDBOX_RAW
config ETH_DESIGNWARE
bool "Synopsys Designware Ethernet MAC"
+ select PHYLIB
help
This MAC is present in SoCs from various vendors. It supports
100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index a6c39c3..3af43b4 100644
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -22,10 +22,6 @@
DECLARE_GLOBAL_DATA_PTR;
-#if !defined(CONFIG_PHYLIB)
-# error "DesignWare Ether MAC requires PHYLIB - missing CONFIG_PHYLIB"
-#endif
-
static int dw_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
{
struct eth_mac_regs *mac_p = bus->priv;
diff --git a/include/configs/axs101.h b/include/configs/axs101.h
index 650d97d..eeb2ae6 100644
--- a/include/configs/axs101.h
+++ b/include/configs/axs101.h
@@ -95,7 +95,6 @@
/*
* Ethernet PHY configuration
*/
-#define CONFIG_PHYLIB
#define CONFIG_MII
#define CONFIG_PHY_GIGE
diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h
index 0e353b9..b5d4847 100644
--- a/include/configs/bf609-ezkit.h
+++ b/include/configs/bf609-ezkit.h
@@ -75,7 +75,6 @@
#define CONFIG_DW_ALTDESCRIPTOR
#define CONFIG_CMD_MII
#define CONFIG_MII
-#define CONFIG_PHYLIB
/* i2c Settings */
#define CONFIG_SYS_I2C
diff --git a/include/configs/galileo.h b/include/configs/galileo.h
index eb16a5e..14a42b1 100644
--- a/include/configs/galileo.h
+++ b/include/configs/galileo.h
@@ -45,7 +45,6 @@
/* 10/100M Ethernet support */
#define CONFIG_DESIGNWARE_ETH
#define CONFIG_DW_ALTDESCRIPTOR
-#define CONFIG_PHYLIB
/* Environment configuration */
#define CONFIG_ENV_SECT_SIZE 0x1000
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index b3f65b6..86eccba 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -105,7 +105,6 @@
#define CONFIG_DW_ALTDESCRIPTOR
#define CONFIG_MII
#define CONFIG_AUTONEG_TIMEOUT (15 * CONFIG_SYS_HZ)
-#define CONFIG_PHYLIB
#define CONFIG_PHY_GIGE
#endif
diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
index 1d69477..d2630f4 100644
--- a/include/configs/spear-common.h
+++ b/include/configs/spear-common.h
@@ -17,7 +17,6 @@
/* Ethernet driver configuration */
#define CONFIG_MII
-#define CONFIG_PHYLIB
#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
#define CONFIG_PHY_GIGE /* Include GbE speed/duplex
detection */
diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h
index 14c6a9e..f421321 100644
--- a/include/configs/stv0991.h
+++ b/include/configs/stv0991.h
@@ -53,7 +53,6 @@
/* GMAC related configs */
#define CONFIG_MII
-#define CONFIG_PHYLIB
#define CONFIG_DW_ALTDESCRIPTOR
#define CONFIG_PHY_MICREL
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 98a2c74..31a68ac 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -312,7 +312,6 @@ extern int soft_i2c_gpio_scl;
#define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY
*/
#define CONFIG_PHY_ADDR 1
#define CONFIG_MII /* MII PHY management */
-#define CONFIG_PHYLIB
#endif
#ifdef CONFIG_USB_EHCI_HCD
diff --git a/include/configs/tb100.h b/include/configs/tb100.h
index 8660ed4..e06484f 100644
--- a/include/configs/tb100.h
+++ b/include/configs/tb100.h
@@ -42,7 +42,6 @@
/*
* Ethernet PHY configuration
*/
-#define CONFIG_PHYLIB
#define CONFIG_PHY_GIGE
/*
diff --git a/include/configs/x600.h b/include/configs/x600.h
index 58f1aca..0263c50 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -77,7 +77,6 @@
/* Ethernet config options */
#define CONFIG_MII
-#define CONFIG_PHYLIB
#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_PHY_GIGE /* Include GbE speed/duplex
detection */
--
2.5.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
