Hello Anand,
On 12/11/2015 01:48 PM, Anand Moon wrote:
Hi Przemyslaw,
I have give it a try to put latest u-boot on my microsdcard
u-boot and it failed to boot. Could you help me out on this.
U-Boot 2016.01-rc2-25762-g00502fe (Dec 11 2015 - 17:49:34 +0530)
CPU: Exynos4412 @ 1 GHz
Model: Odroid based on Exynos4412
Board: Odroid based on Exynos4412
Type: u3
DRAM: 2 GiB
__of_translate_address: Bad cell count for gpf0
__of_translate_address: Bad cell count for gpj0
__of_translate_address: Bad cell count for gpk0
__of_translate_address: Bad cell count for gpm0
__of_translate_address: Bad cell count for gpx0
LDO20@VDDQ_EMMC_1.8V: set 1800000 uV; enabling
LDO22@VDDQ_EMMC_2.8V: set 2800000 uV; enabling
LDO21@TFLASH_2.8V: set 2800000 uV; enabling
MMC: EXYNOS DWMMC: 0
Card did not respond to voltage select!
*** Warning - MMC init failed, using default environment
Net: No ethernet found.
Hit any key to stop autoboot: 0
** Bad device mmc 0 **
** Bad device mmc 0 **
** Bad device mmc 0 **
** Bad device mmc 0 **
Odroid #
Odroid #
Odroid #
Odroid #
-Anand Moon
Yes, I know about this issue. There is a patch which fixes this:
https://patchwork.ozlabs.org/patch/537372/
Please apply this patch locally, I will send another solution for this
issue, since at present it may be unsafe for some cases on other platforms.
Best regards,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marc...@samsung.com
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
