Since SPI_TX_* are spi_slave{} members so use spi protocol
notation instead spi flash programming, like
SPI_TX_BP => SPI_TX_BYTE
SPI_TX_QPP => SPI_TX_QUAD
Cc: Bin Meng <bmeng...@gmail.com>
Cc: Simon Glass <s...@chromium.org>
Signed-off-by: Jagan Teki <jt...@openedev.com>
---
Changes for v2:
- none
drivers/mtd/spi/sf_probe.c | 2 +-
drivers/mtd/spi/spi_flash.c | 4 ++--
drivers/spi/ich.c | 2 +-
include/spi.h | 4 ++--
4 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
index 3519ffd..daa1d5b 100644
--- a/drivers/mtd/spi/sf_probe.c
+++ b/drivers/mtd/spi/sf_probe.c
@@ -128,7 +128,7 @@ static int spi_flash_std_write(struct udevice *dev, u32
offset, size_t len,
#if defined(CONFIG_SPI_FLASH_SST)
if (flash->flags & SNOR_F_SST_WR) {
- if (flash->spi->mode & SPI_TX_BP)
+ if (flash->spi->mode & SPI_TX_BYTE)
return sst_write_bp(flash, offset, len, buf);
else
return sst_write_wp(flash, offset, len, buf);
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 836aad9..513d9ad 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -968,7 +968,7 @@ int spi_flash_scan(struct spi_flash *flash)
flash->write = spi_flash_cmd_write_ops;
#if defined(CONFIG_SPI_FLASH_SST)
if (flash->flags & SNOR_F_SST_WR) {
- if (spi->mode & SPI_TX_BP)
+ if (spi->mode & SPI_TX_BYTE)
flash->write = sst_write_bp;
else
flash->write = sst_write_wp;
@@ -1042,7 +1042,7 @@ int spi_flash_scan(struct spi_flash *flash)
}
/* Not require to look for fastest only two write cmds yet */
- if (params->flags & WR_QPP && spi->mode & SPI_TX_QPP)
+ if (params->flags & WR_QPP && spi->mode & SPI_TX_QUAD)
flash->write_cmd = CMD_QUAD_PAGE_PROGRAM;
else
/* Go for default supported write cmd */
diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c
index 64322dd..d11132c 100644
--- a/drivers/spi/ich.c
+++ b/drivers/spi/ich.c
@@ -753,7 +753,7 @@ static int ich_spi_child_pre_probe(struct udevice *dev)
*/
if (plat->ich_version == 7) {
slave->op_mode_rx = SPI_OPM_RX_AS;
- slave->mode = SPI_TX_BP;
+ slave->mode = SPI_TX_BYTE;
}
return 0;
diff --git a/include/spi.h b/include/spi.h
index 2b36c5a..8ffd9aa 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -23,8 +23,8 @@
#define SPI_LOOP 0x20 /* loopback mode */
#define SPI_SLAVE 0x40 /* slave mode */
#define SPI_PREAMBLE 0x80 /* Skip preamble bytes
*/
-#define SPI_TX_BP 0x100 /* transmit with 1 wire byte */
-#define SPI_TX_QPP 0x200 /* transmit with 4 wires */
+#define SPI_TX_BYTE 0x100 /* transmit with 1 wire byte */
+#define SPI_TX_QUAD 0x200 /* transmit with 4 wires */
/* SPI transfer flags */
#define SPI_XFER_BEGIN 0x01 /* Assert CS before transfer */
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
