Hi Shengjiang, On Fri, 2015-12-18 at 16:43 +0800, shengjiangwu wrote: > Updated pinmux group MIXED1IO[0-13] for RGMII1. > Updated EMAC1 clock. > > Signed-off-by: shengjiangwu <shengjian...@icloud.com> > Cc: Chin Liang See <cl...@altera.com> > Cc: Dinh Nguyen <dingu...@opensource.altera.com> > Cc: Dinh Nguyen <dinh.li...@gmail.com> > Cc: Pavel Machek <pa...@denx.de> > Cc: Marek Vasut <ma...@denx.de> > Cc: Stefan Roese <s...@denx.de> > --- > Changes for v2: > - fixed wrong perpll for emac1 > --- > board/altera/cyclone5-socdk/qts/pll_config.h | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/board/altera/cyclone5-socdk/qts/pll_config.h > b/board/altera/cyclone5-socdk/qts/pll_config.h > index eccc705..5b754ac 100644 > --- a/board/altera/cyclone5-socdk/qts/pll_config.h > +++ b/board/altera/cyclone5-socdk/qts/pll_config.h > @@ -65,7 +65,7 @@ > #define CONFIG_HPS_CLK_PERVCO_HZ 1000000000 > #define CONFIG_HPS_CLK_SDRVCO_HZ 666666666 > #define CONFIG_HPS_CLK_EMAC0_HZ 250000000 > -#define CONFIG_HPS_CLK_EMAC1_HZ 50000000 > +#define CONFIG_HPS_CLK_EMAC1_HZ 250000000
This is good. But I believe you miss the pinmux change here. You just need to take the previous patch and made the change. Thanks Chin Liang > #define CONFIG_HPS_CLK_USBCLK_HZ 200000000 > #define CONFIG_HPS_CLK_NAND_HZ 50000000 > #define CONFIG_HPS_CLK_SDMMC_HZ 200000000 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
