On Tue, 2015-12-22 at 21:10 +0100, Marek Vasut wrote: > On Tuesday, December 22, 2015 at 05:00:42 PM, Chin Liang See wrote: > > On Tue, 2015-12-22 at 16:53 +0100, Marek Vasut wrote: > > > On Tuesday, December 22, 2015 at 04:49:54 PM, Chin Liang See > > > wrote: > > > > On Fri, 2015-12-18 at 14:10 +0100, Marek Vasut wrote: > > > > > On Friday, December 18, 2015 at 10:39:12 AM, Chin Liang See > > > > > > > > > wrote: > > > > [..] > > > > > > > > > > > I will send that patch out shortly, but I think there is > > > > > > > something > > > > > > > else > > > > > > > going on. I am starting to suspect something with the L3 > > > > > > > interconnect. > > > > > > > Maybe some R/W reordering or something like that in > > > > > > > NIC301 . > > > > > > > > > > > > > > Are you able to replicate my USB issue with mainline on > > > > > > > socfpga ? > > > > > > > What > > > > > > > happens if you run usb reset with a USB stick plugged in? > > > > > > > What > > > > > > > compiler > > > > > > > version do you use ? > > > > > > > > > > > > I tried that few weeks back and it works for me. FYI, I am > > > > > > using > > > > > > the > > > > > > mentor toolchain "arm-altera-eabi" that come with SOCEDS. > > > > > > Maybe > > > > > > I > > > > > > can > > > > > > try again with your toolchain. > > > > > > > > > > I am using the unreleased ELDK 5.8 (gcc 4.9.2) and debian gcc > > > > > 5.2. > > > > > Which gcc version is in the mentor toolchain? > > > > > > > > Mine is Sourcery CodeBench Lite 2015.05-11 (gcc 4.9.2 also) > > > > > > > > > Can you try it again with u-boot/master ? I'd be interested > > > > > in > > > > > your > > > > > results. > > > > > Can you share the entire output of the U-Boot and run > > > > > 'dcache' > > > > > command before > > > > > doing 'usb reset' ? I am seeing this issue with Sandisk > > > > > Cruzer > > > > > USB > > > > > 2.0 sticks > > > > > now too. > > > > > > > > I can do that but git clone will take some time > > > > > > You can use git fetch in your current repo. > > > > > > I started wondering how you're testing the CV SoCDK, since I > > > discovered just > > > this morning that it doesn't even boot (I already sent patches to > > > fix > > > that). > > > > I presume you are referring to SPL? FYI, I am still using the SPL > > from > > SOCEDS while using latest U-Boot from mainstream. That's why I > > didn't > > the issue noticed by Shengjiang and you. > > Well, at least you're honest ... but *sigh*, it'd be nice if you > tested > mainline only, really.
Yah, after all the build error issue, I believe I would need to make the switch. Let me take a look so I can check the SPL health. I will fetch and try it out. > > > But will make the switch soon once done with few in progress > > patches > > for U-Boot. > > I will collect the remaining patches today and see how socdk fares. Let me know if you notice any failure while I will do the test my side later. Thanks Chin Liang > > Best regards, > Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot