On Thu, Aug 13, 2009 at 05:58:57PM -0500, alfred steele wrote: > > That controls whether the "jffs2" command supports NAND. > Iis it a MUST HAVE if you are using a jffs2 root filesystem? I mean do > i have to turn on "CONFIG_JFFS2_NAND" if i have a jff2 rootfs. > Are there any other configuration flags i need to turn on for JFFS2 support?
If you are only programming the flash from U-Boot, but are not loading anything using the U-Boot "jffs2" command ("nand read" is OK), no. If you're using the "jffs2" command, then presumably it is required. -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot