On 01/16/2016 05:51 PM, Marcel Ziswiler wrote:
Hi Simon
As mentioned before I noticed Ethernet (on-module USB ASIX chip) to be
broken on master while it still worked fine in v2016.01. I kind of
remember having once noticed something along those lines when testing
some of your early dm stuff but could not find our discussion about it
anymore plus I don't think it did actually lead anywhere.
FWIW it currently crashes as follows (showing Colibri T20 but the same
happens on Colibri T30):
U-Boot SPL 2016.01-00205-gb8c5b47 (Jan 17 2016 - 01:31:48)
...
Colibri T20 # usb start
starting USB...
USB0: USB EHCI 1.00
USB1: USB EHCI 1.00
USB2: USB EHCI 1.00
scanning bus 1 for devices... 1 USB Device(s) found
scanning bus 2 for devices...
Warning: asix_eth using MAC address from ROM
2 USB Device(s) found
scanning bus 0 for devices... 2 USB Device(s) found
Colibri T20 # dhcp
BOOTP broadcast 1
EHCI timed out on TD - token=0x88008d80
Rx: failed to receive: -5
BOOTP broadcast 2
EHCI timed out on TD - token=0x8008d80
Rx: failed to receive: -5
BOOTP broadcast 3
EHCI timed out on TD - token=0x88008d80
Rx: failed to receive: -5
BOOTP broadcast 4
EHCI timed out on TD - token=0x8008d80
Rx: failed to receive: -5
BOOTP broadcast 5
EHCI timed out on TD - token=0x88008d80
Rx: failed to receive: -5
BOOTP broadcast 6
EHCI timed out on TD - token=0x8008d80
Rx: failed to receive: -5
Retry time exceeded; starting again
data abort
pc : [<1fb4d194>] lr : [<1fbb9784>]
reloc pc : [<0012d194>] lr : [<00199784>]
sp : 1d61c5e0 ip : 6aa665ea fp : 1d62bca0
r10: 00000000 r9 : 1d61fee0 r8 : 1d62bca0
r7 : 00000000 r6 : 1d6312e0 r5 : 1f6da8e0 r4 : 00000000
r3 : 1c585760 r2 : 03155180 r1 : 00000000 r0 : caa661ca
Flags: NzCv IRQs off FIQs off Mode SVC_32
Resetting CPU ...
resetting ...
Do you have any clue what could be going on?
FWIW, I tried that same commit on Beaver with an asix USB Ethernet
device and didn't see that problem, even after aligning the config file
for Beaver more closely with colibri_t30 (e.g. disabling PCIe support,
copying all the config options that colibri_t30 has but beaver doesn't
into beaver's config file).
I wonder if it's anything to do with having 3 USB controllers active
rather than 2 (although that seems unlikely; I can see going from 1->2
causing issues, but once 2 work, adding more seems like it should).
Perhaps there's a DRAM bandwidth issue, but then I can't see why the
patches between v2016.01 and the commit you mentioned would affect that.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
