The environment "bootm_low" is updated before the "bootz" command.
This is common for all the boot modes (NOR, NAND, TFTP, etc.) and
can be refactored.

Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---

 include/configs/uniphier.h | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index c13dc89..f8b0b15 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -201,22 +201,21 @@
        "ramdisk_addr_r=0x84a00000\0" \
        "ramdisk_size=0x00600000\0" \
        "ramdisk_file=rootfs.cpio.uboot\0" \
-       "norboot=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
-               "setexpr kernel_addr $nor_base + $kernel_addr &&" \
+       "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
+               "bootz $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
+       "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
                "cp.b $kernel_addr $kernel_addr_r $kernel_size &&" \
-               "setexpr ramdisk_addr $nor_base + $ramdisk_addr &&" \
-               "setexpr fdt_addr $nor_base + $fdt_addr &&" \
-               "bootz $kernel_addr_r $ramdisk_addr $fdt_addr\0" \
-       "nandboot=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
-               "nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
+               "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \
+               "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \
+               "run boot_common\0" \
+       "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
                "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
                "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
-               "bootz $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
-       "tftpboot=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
-               "tftpboot $kernel_addr_r $bootfile &&" \
+               "run boot_common\0" \
+       "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
                "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
                "tftpboot $fdt_addr_r $fdt_file &&" \
-               "bootz $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0"
+               "run boot_common\0"
 #endif
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to