Hello Ladislav,
Am 17.01.2016 um 04:16 schrieb Ladislav Michl:
Convert IGEP board to use UBI volumes for U-Boot, its environment and
kernel. With exception of first four sectors read by SoC boot
ROM whole NAND is UBI managed. As code is too big now, drop
CONFIG_SPL_EXT_SUPPORT to make it fit.
Signed-off-by: Ladislav Michl <la...@linux-mips.org>
---
include/configs/omap3_igep00x0.h | 80 ++++++++++++++++++++++------------------
1 file changed, 45 insertions(+), 35 deletions(-)
Reviewed-by: Heiko Schocher <h...@denx.de>
bye,
Heiko
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index 5da6cfd..9afbcbe 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -74,6 +74,8 @@
#define CONFIG_CMD_CACHE
#ifdef CONFIG_BOOT_ONENAND
#define CONFIG_CMD_ONENAND /* ONENAND support */
+#else
+#define CONFIG_CMD_UBI
#endif
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PING
@@ -86,6 +88,10 @@
"stdout=serial\0" \
"stderr=serial\0"
+#define ENV_MTD_SETTINGS \
+ "mtdids=nand0=gpmc-nand.0\0" \
+ "mtdparts=mtdparts=gpmc-nand.0:512k(SPL),-(UBI)\0"
+
#define MEM_LAYOUT_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
"scriptaddr=0x87E00000\0" \
@@ -96,36 +102,15 @@
#include <config_distro_bootcmd.h>
-
#define CONFIG_EXTRA_ENV_SETTINGS \
ENV_DEVICE_SETTINGS \
+ ENV_MTD_SETTINGS \
MEM_LAYOUT_SETTINGS \
BOOTENV
#endif
/*
- * FLASH and environment organization
- */
-
-#ifdef CONFIG_BOOT_ONENAND
-#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
-
-#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
-
-#define CONFIG_ENV_IS_IN_ONENAND 1
-#define CONFIG_ENV_SIZE (512 << 10) /* Total Size
Environment */
-#define CONFIG_ENV_ADDR ONENAND_ENV_OFFSET
-#endif
-
-#ifdef CONFIG_NAND
-#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
-#define CONFIG_ENV_IS_IN_NAND 1
-#define CONFIG_ENV_SIZE (512 << 10) /* Total Size
Environment */
-#define CONFIG_ENV_ADDR NAND_ENV_OFFSET
-#endif
-
-/*
* SMSC911x Ethernet
*/
#if defined(CONFIG_CMD_NET)
@@ -134,19 +119,50 @@
#define CONFIG_SMC911X_BASE 0x2C000000
#endif /* (CONFIG_CMD_NET) */
+/*
+ * FLASH and environment organization
+ */
+#ifdef CONFIG_NAND
+#define CONFIG_SPL_UBI 1
+#define CONFIG_SPL_UBI_MAX_VOL_LEBS 256
+#define CONFIG_SPL_UBI_MAX_PEB_SIZE (256*1024)
+#define CONFIG_SPL_UBI_MAX_PEBS 4096
+#define CONFIG_SPL_UBI_VOL_IDS 8
+#define CONFIG_SPL_UBI_LOAD_MONITOR_ID 0
+#define CONFIG_SPL_UBI_LOAD_KERNEL_ID 3
+#define CONFIG_SPL_UBI_LOAD_ARGS_ID 4
+#define CONFIG_SPL_UBI_PEB_OFFSET 4
+#define CONFIG_SPL_UBI_VID_OFFSET 512
+#define CONFIG_SPL_UBI_LEB_START 2048
+#define CONFIG_SPL_UBI_INFO_ADDR 0x88080000
+
+#define CONFIG_ENV_IS_IN_UBI 1
+#define CONFIG_ENV_UBI_PART "UBI"
+#define CONFIG_ENV_UBI_VOLUME "config"
+#define CONFIG_ENV_UBI_VOLUME_REDUND "config_r"
+#define CONFIG_UBI_SILENCE_MSG 1
+#define CONFIG_UBIFS_SILENCE_MSG 1
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+#define CONFIG_ENV_SIZE (32*1024)
+
+#define CONFIG_RBTREE
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT "nand0=gpmc-nand.0"
+#define MTDPARTS_DEFAULT "mtdparts=gpmc-nand.0:512k(SPL),-(UBI)"
+
/* OneNAND boot config */
#ifdef CONFIG_BOOT_ONENAND
#define CONFIG_SPL_ONENAND_SUPPORT
-#define CONFIG_SYS_ONENAND_U_BOOT_OFFS 0x80000
#define CONFIG_SYS_ONENAND_PAGE_SIZE 2048
-#define CONFIG_SPL_ONENAND_LOAD_ADDR 0x80000
-#define CONFIG_SPL_ONENAND_LOAD_SIZE \
- (512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
-
+#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
+#define CONFIG_SYS_ONENAND_U_BOOT_OFFS 0x80000
#endif
/* NAND boot config */
#ifdef CONFIG_NAND
+#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT 64
@@ -166,14 +182,8 @@
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_BCH
-
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
-/* NAND: SPL falcon mode configs */
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_CMD_SPL_NAND_OFS 0x240000
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
-#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
-#endif
#endif
+#undef CONFIG_SPL_EXT_SUPPORT
+
#endif /* __IGEP00X0_H */
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
