On Thursday, January 21, 2016 at 09:55:59 AM, Anand Moon wrote: > Hi Marek, > > On 21 January 2016 at 02:04, Marek Vasut <ma...@denx.de> wrote: > > On Wednesday, January 20, 2016 at 09:10:07 PM, Anand Moon wrote: > >> Hi Ted / Marek / Stephen, > >> > >> On 20 January 2016 at 22:22, Stephen Warren <swar...@wwwdotorg.org> wrote: > >> > On 01/19/2016 11:24 PM, Ted Chen wrote: > >> >> This patch adds driver support for the Realtek RTL8152B/RTL8153 USB > >> >> network adapters. > >> > > >> > This looks fine to me, although I didn't take a detailed enough look > >> > to actually give and an ack/reviewed-by. > >> > >> What about the other patch: usb xhci Fix vendor command error if the > >> request.patch > > > > Please repost it , make sure to CC everyone . If there is agreement that > > it fixes real issue, I'll pick it. > > > >> After setting the usbether mac address my odroid xu4 board shop booting. > >> even after reset of environment it dose not boot. > >> ------------------------------------------------------------------------ > >> --- ------------------------------ U-Boot 2016.01-00406-g048c61d-dirty > >> (Jan 21 2016 - 06:27:09 +1030) for ODROID-XU3 > >> > >> CPU: Exynos5422 @ 800 MHz > >> Model: Odroid XU3 based on EXYNOS5422 > >> Board: Odroid XU3 based on EXYNOS5422 > >> Type: xu4 > >> DRAM: 2 GiB > >> MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 > >> *** Warning - bad CRC, using default environment > >> > >> In: serial > >> Out: serial > >> Err: serial > >> Net: No ethernet found. > >> Hit any key to stop autoboot: 0 > >> ODROID-XU3 # > >> ODROID-XU3 # > >> ODROID-XU3 # > >> ODROID-XU3 # setenv usbethaddr 00:1e:06:31:06:b3 > >> ODROID-XU3 # saveenv > > > > You ran saveenv, so usbethaddr is now in permanent storage. That's why > > 'reset' won't help you. > > But I need to set common mac address so that I will get single IP. > I don't need random mac address. > > Any way thanks for your input.
That was just a comment /wrt your observation that the board stops booting and reset doesn't fix it ;-) > >> Saving Environment to MMC... > >> Writing to MMC(0)... done > >> ODROID-XU3 # usb info > >> USB is stopped. Please issue 'usb start' first. > >> ODROID-XU3 # usb start > >> starting USB... > >> USB0: USB EHCI 1.00 > >> USB1: Register 2000140 NbrPorts 2 > >> Starting the controller > >> USB XHCI 1.00 > >> USB2: Register 2000140 NbrPorts 2 > >> Starting the controller > >> USB XHCI 1.00 > >> scanning bus 0 for devices... 1 USB Device(s) found > >> scanning bus 1 for devices... Device not responding to set address. > >> > >> USB device not accepting new address (error=80000000) > > > > This error looks suspicious. > > I had another wireless mouse and USB to Ethernet adapter connected to the > board may be it's not getting recognized at that moment. > > Any way thanks for you input. Looks like something might be afoot with the controller itself ? > >> 2 USB Device(s) found > >> scanning bus 2 for devices... 2 USB Device(s) found > >> > >> scanning usb for ethernet devices... 1 Ethernet Device(s) found > > > > [...] > > Well I have tested the TFTP booting functionality of the board and it > was success. > Fell free to add my tested by for this version. > > Tested-by: Anand Moon <linux.am...@gmail.com> Excellent, thanks! _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot