This file has many features that are not needed by SPL. Use #ifdef to
remove the unused features and reduce the code size.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v9: None
Changes in v2: None
drivers/pinctrl/rockchip/pinctrl_rk3288.c | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3288.c
b/drivers/pinctrl/rockchip/pinctrl_rk3288.c
index 0e7721e..53b8cf2 100644
--- a/drivers/pinctrl/rockchip/pinctrl_rk3288.c
+++ b/drivers/pinctrl/rockchip/pinctrl_rk3288.c
@@ -158,6 +158,7 @@ static void pinctrl_rk3288_i2c_config(struct rk3288_grf
*grf,
GPIO0_C0_MASK << GPIO0_C0_SHIFT,
GPIO0_C0_I2C0PMU_SCL << GPIO0_C0_SHIFT);
break;
+#ifndef CONFIG_SPL_BUILD
case PERIPH_ID_I2C1:
rk_clrsetreg(&grf->gpio8a_iomux,
GPIO8A4_MASK << GPIO8A4_SHIFT |
@@ -194,12 +195,14 @@ static void pinctrl_rk3288_i2c_config(struct rk3288_grf
*grf,
GPIO7C4_MASK << GPIO7C4_SHIFT,
GPIO7C4_I2C5HDMI_SCL << GPIO7C4_SHIFT);
break;
+#endif
default:
debug("i2c id = %d iomux error!\n", i2c_id);
break;
}
}
+#ifndef CONFIG_SPL_BUILD
static void pinctrl_rk3288_lcdc_config(struct rk3288_grf *grf, int lcd_id)
{
switch (lcd_id) {
@@ -219,11 +222,13 @@ static void pinctrl_rk3288_lcdc_config(struct rk3288_grf
*grf, int lcd_id)
break;
}
}
+#endif
static int pinctrl_rk3288_spi_config(struct rk3288_grf *grf,
enum periph_id spi_id, int cs)
{
switch (spi_id) {
+#ifndef CONFIG_SPL_BUILD
case PERIPH_ID_SPI0:
switch (cs) {
case 0:
@@ -260,6 +265,7 @@ static int pinctrl_rk3288_spi_config(struct rk3288_grf *grf,
GPIO7B5_SPI1_CSN0 << GPIO7B5_SHIFT |
GPIO7B4_SPI1_CLK << GPIO7B4_SHIFT);
break;
+#endif
case PERIPH_ID_SPI2:
switch (cs) {
case 0:
@@ -297,6 +303,7 @@ err:
static void pinctrl_rk3288_uart_config(struct rk3288_grf *grf, int uart_id)
{
switch (uart_id) {
+#ifndef CONFIG_SPL_BUILD
case PERIPH_ID_UART_BT:
rk_clrsetreg(&grf->gpio4c_iomux,
GPIO4C3_MASK << GPIO4C3_SHIFT |
@@ -319,6 +326,7 @@ static void pinctrl_rk3288_uart_config(struct rk3288_grf
*grf, int uart_id)
GPIO5B1_UART1BB_SOUT << GPIO5B1_SHIFT |
GPIO5B0_UART1BB_SIN << GPIO5B0_SHIFT);
break;
+#endif
case PERIPH_ID_UART_DBG:
rk_clrsetreg(&grf->gpio7ch_iomux,
GPIO7C7_MASK << GPIO7C7_SHIFT |
@@ -326,6 +334,7 @@ static void pinctrl_rk3288_uart_config(struct rk3288_grf
*grf, int uart_id)
GPIO7C7_UART2DBG_SOUT << GPIO7C7_SHIFT |
GPIO7C6_UART2DBG_SIN << GPIO7C6_SHIFT);
break;
+#ifndef CONFIG_SPL_BUILD
case PERIPH_ID_UART_GPS:
rk_clrsetreg(&grf->gpio7b_iomux,
GPIO7B2_MASK << GPIO7B2_SHIFT |
@@ -349,6 +358,7 @@ static void pinctrl_rk3288_uart_config(struct rk3288_grf
*grf, int uart_id)
GPIO5B6_UART4EXP_SOUT << GPIO5B6_SHIFT |
GPIO5B7_UART4EXP_SIN << GPIO5B7_SHIFT);
break;
+#endif
default:
debug("uart id = %d iomux error!\n", uart_id);
break;
@@ -393,6 +403,7 @@ static void pinctrl_rk3288_sdmmc_config(struct rk3288_grf
*grf, int mmc_id)
}
}
+#ifndef CONFIG_SPL_BUILD
static void pinctrl_rk3288_hdmi_config(struct rk3288_grf *grf, int hdmi_id)
{
switch (hdmi_id) {
@@ -407,6 +418,7 @@ static void pinctrl_rk3288_hdmi_config(struct rk3288_grf
*grf, int hdmi_id)
break;
}
}
+#endif
static int rk3288_pinctrl_request(struct udevice *dev, int func, int flags)
{
@@ -441,17 +453,19 @@ static int rk3288_pinctrl_request(struct udevice *dev,
int func, int flags)
case PERIPH_ID_UART4:
pinctrl_rk3288_uart_config(priv->grf, func);
break;
+#ifndef CONFIG_SPL_BUILD
case PERIPH_ID_LCDC0:
case PERIPH_ID_LCDC1:
pinctrl_rk3288_lcdc_config(priv->grf, func);
break;
+ case PERIPH_ID_HDMI:
+ pinctrl_rk3288_hdmi_config(priv->grf, func);
+ break;
+#endif
case PERIPH_ID_SDMMC0:
case PERIPH_ID_SDMMC1:
pinctrl_rk3288_sdmmc_config(priv->grf, func);
break;
- case PERIPH_ID_HDMI:
- pinctrl_rk3288_hdmi_config(priv->grf, func);
- break;
default:
return -EINVAL;
}
--
2.7.0.rc3.207.g0ac5344
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
