Use this function in preference to the macro.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v9: None
Changes in v2: None
arch/arm/mach-rockchip/rk3288/sdram_rk3288.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-rockchip/rk3288/sdram_rk3288.c
b/arch/arm/mach-rockchip/rk3288/sdram_rk3288.c
index 09017cc..5da04b9 100644
--- a/arch/arm/mach-rockchip/rk3288/sdram_rk3288.c
+++ b/arch/arm/mach-rockchip/rk3288/sdram_rk3288.c
@@ -400,7 +400,7 @@ static void set_bandwidth_ratio(const struct chan_info
*chan, u32 channel,
if (n == 1) {
setbits_le32(&pctl->ppcfg, 1);
- writel(RK_SETBITS(1 << (8 + channel)), &grf->soc_con0);
+ rk_setreg(&grf->soc_con0, 1 << (8 + channel));
setbits_le32(&msch->ddrtiming, 1 << 31);
/* Data Byte disable*/
clrbits_le32(&publ->datx8[2].dxgcr, 1);
@@ -410,7 +410,7 @@ static void set_bandwidth_ratio(const struct chan_info
*chan, u32 channel,
setbits_le32(&publ->datx8[3].dxdllcr, DXDLLCR_DLLDIS);
} else {
clrbits_le32(&pctl->ppcfg, 1);
- writel(RK_CLRBITS(1 << (8 + channel)), &grf->soc_con0);
+ rk_clrreg(&grf->soc_con0, 1 << (8 + channel));
clrbits_le32(&msch->ddrtiming, 1 << 31);
/* Data Byte enable*/
setbits_le32(&publ->datx8[2].dxgcr, 1);
@@ -571,8 +571,7 @@ static void dram_all_config(const struct dram_info *dram,
dram_cfg_rbc(&dram->chan[chan], chan, sdram_params);
}
writel(sys_reg, &dram->pmu->sys_reg[2]);
- writel(RK_CLRSETBITS(0x1F, sdram_params->base.stride),
- &dram->sgrf->soc_con2);
+ rk_clrsetreg(&dram->sgrf->soc_con2, 0x1f, sdram_params->base.stride);
}
static int sdram_init(const struct dram_info *dram,
--
2.7.0.rc3.207.g0ac5344
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
