Hi Scott,

Gentle ping.. it's a few weeks since patch sent out.

Thanks,
Peng.

On Sat, Jan 09, 2016 at 09:23:53PM +0800, Peng Fan wrote:
>From: Peng Fan <peng....@nxp.com>
>
>Fix error handling for mxs_nand_init.
>
>The original error handling is wrong for err2 and err1.
>Should first free desc[x], then free desc.
>
>This patch also correctly handle err3, should use
>MXS_DMA_CHANNEL_AHB_APBH_GPMI0 as the check point.
>
>Signed-off-by: Peng Fan <peng....@nxp.com>
>Cc: Stefano Babic <sba...@denx.de>
>CC: Fabio Estevam <fabio.este...@freescale.com>
>Cc: Scott Wood <scottw...@freescale.com>
>Signed-off-by: Peng Fan <peng....@nxp.com>
>---
> drivers/mtd/nand/mxs_nand.c | 24 +++++++++++++++---------
> 1 file changed, 15 insertions(+), 9 deletions(-)
>
>diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c
>index f15cf36..5102e4b 100644
>--- a/drivers/mtd/nand/mxs_nand.c
>+++ b/drivers/mtd/nand/mxs_nand.c
>@@ -1090,24 +1090,29 @@ int mxs_nand_init(struct mxs_nand_info *info)
>               (struct mxs_gpmi_regs *)MXS_GPMI_BASE;
>       struct mxs_bch_regs *bch_regs =
>               (struct mxs_bch_regs *)MXS_BCH_BASE;
>-      int i = 0, j;
>+      int i = 0, j, ret = 0;
> 
>       info->desc = malloc(sizeof(struct mxs_dma_desc *) *
>                               MXS_NAND_DMA_DESCRIPTOR_COUNT);
>-      if (!info->desc)
>+      if (!info->desc) {
>+              ret = -ENOMEM;
>               goto err1;
>+      }
> 
>       /* Allocate the DMA descriptors. */
>       for (i = 0; i < MXS_NAND_DMA_DESCRIPTOR_COUNT; i++) {
>               info->desc[i] = mxs_dma_desc_alloc();
>-              if (!info->desc[i])
>+              if (!info->desc[i]) {
>+                      ret = -ENOMEM;
>                       goto err2;
>+              }
>       }
> 
>       /* Init the DMA controller. */
>       for (j = MXS_DMA_CHANNEL_AHB_APBH_GPMI0;
>               j <= MXS_DMA_CHANNEL_AHB_APBH_GPMI7; j++) {
>-              if (mxs_dma_init_channel(j))
>+              ret = mxs_dma_init_channel(j);
>+              if (ret)
>                       goto err3;
>       }
> 
>@@ -1127,15 +1132,16 @@ int mxs_nand_init(struct mxs_nand_info *info)
>       return 0;
> 
> err3:
>-      for (--j; j >= 0; j--)
>+      for (--j; j >= MXS_DMA_CHANNEL_AHB_APBH_GPMI0; j--)
>               mxs_dma_release(j);
> err2:
>-      free(info->desc);
>-err1:
>       for (--i; i >= 0; i--)
>               mxs_dma_desc_free(info->desc[i]);
>-      printf("MXS NAND: Unable to allocate DMA descriptors\n");
>-      return -ENOMEM;
>+      free(info->desc);
>+err1:
>+      if (ret == -ENOMEM)
>+              printf("MXS NAND: Unable to allocate DMA descriptors\n");
>+      return ret;
> }
> 
> /*!
>-- 
>2.6.2
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to