On Thursday, January 28, 2016 09:44 PM, Marek Vasut wrote:
On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote:
On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote:
In order to support boards with ath79 from different vendors and
thus located under /board/$VENDOR/ , we need to define SYS_VENDOR
and SYS_SOC in the board-level Kconfig. Move these two variables
into board-level Kconfig for both ap121 and ap143 boards.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierz...@gmail.com>
Cc: Wills Wang <wills.w...@live.com>
---
arch/mips/mach-ath79/Kconfig | 6 ------
board/ath79/ap121/Kconfig | 6 ++++++
board/ath79/ap143/Kconfig | 6 ++++++
3 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig
index 95f7de9..8f07a77 100644
--- a/arch/mips/mach-ath79/Kconfig
+++ b/arch/mips/mach-ath79/Kconfig
@@ -1,12 +1,6 @@
menu "QCA/Athroes 7xxx/9xxx platforms"
depends on ARCH_ATH79
-config SYS_VENDOR
- default "ath79"
-
-config SYS_SOC
- default "ath79"
-
config SOC_AR933X
bool
select SUPPORTS_BIG_ENDIAN
diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig
index ec72914..a4e5690 100644
--- a/board/ath79/ap121/Kconfig
+++ b/board/ath79/ap121/Kconfig
@@ -1,5 +1,11 @@
if BOARD_AP121
+config SYS_VENDOR
+ default "ath79"
+
+config SYS_SOC
+ default "ath79"
+
config SYS_BOARD
default "ap121"
diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig
index 118b9b5..2e54fa7 100644
--- a/board/ath79/ap143/Kconfig
+++ b/board/ath79/ap143/Kconfig
@@ -1,5 +1,11 @@
if BOARD_AP143
+config SYS_VENDOR
+ default "ath79"
+
+config SYS_SOC
+ default "ath79"
+
config SYS_BOARD
default "ap143"
I plan to place ap121 and ap143 into board/qca, and then
move these into board directory.
That's fine, but keep this patch or something along those lines, since
I want to create board/arduino/yun/ soon after your stuff is accepted.
btw. I got both EHCI and ethernet operational, but I am still struggling
with booting the board from the SPI NOR. I think there's something broken
in start.S or lowlevel_init.S . Which board do you use for your development
and testing ?
My private board was made by myself, it originate from AP121, and
it's circuit is compatible with AP121.
--
Best Regards
Wills
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
