* Added PCIe support for P1 P2 RDB
* Calls the fsl_pci_init_port function to initialize all the PCIe ports
on the board.
Signed-off-by: Poonam Aggrwal <poonam.aggr...@freescale.com>
Signed-off-by: Kumar Gala <ga...@kernel.crashing.org>
---
- applies on git.denx.de/u-boot-mpc85xx.git branch->next
board/freescale/p1_p2_rdb/Makefile | 1 +
board/freescale/p1_p2_rdb/pci.c | 112 ++++++++++++++++++++++++++++++++++++
include/configs/P1_P2_RDB.h | 6 ++
3 files changed, 119 insertions(+), 0 deletions(-)
create mode 100644 board/freescale/p1_p2_rdb/pci.c
diff --git a/board/freescale/p1_p2_rdb/Makefile
b/board/freescale/p1_p2_rdb/Makefile
index 9107263..c366f7c 100644
--- a/board/freescale/p1_p2_rdb/Makefile
+++ b/board/freescale/p1_p2_rdb/Makefile
@@ -27,6 +27,7 @@ LIB = $(obj)lib$(BOARD).a
COBJS-y += $(BOARD).o
COBJS-y += law.o
COBJS-y += tlb.o
+COBJS-$(CONFIG_PCI) += pci.o
COBJS-y += ddr.o
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
diff --git a/board/freescale/p1_p2_rdb/pci.c b/board/freescale/p1_p2_rdb/pci.c
new file mode 100644
index 0000000..3867705
--- /dev/null
+++ b/board/freescale/p1_p2_rdb/pci.c
@@ -0,0 +1,112 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/immap_85xx.h>
+#include <asm/io.h>
+#include <asm/fsl_pci.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif
+
+#ifdef CONFIG_PCIE2
+static struct pci_controller pcie2_hose;
+#endif
+
+void pci_init_board(void)
+{
+ struct fsl_pci_info pci_info[2];
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ uint devdisr = in_be32(&gur->devdisr);
+ uint io_sel = (in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+ uint host_agent = (in_be32(&gur->porbmsr) & MPC85xx_PORBMSR_HA) >> 16;
+ int num = 0;
+ int first_free_busno = 0;
+ int last_busno;
+
+ int pcie_ep, pcie_configured;
+
+ debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
+ devdisr, io_sel, host_agent);
+
+ if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
+ printf (" eTSEC2 is in sgmii mode.\n");
+
+#ifdef CONFIG_PCIE2
+ SET_STD_PCIE_INFO(pci_info[num], 2);
+ pcie_ep = (host_agent == 2) || (host_agent == 4) ||
+ (host_agent == 6) || (host_agent == 0);
+ pcie_configured = (io_sel == 0xE);
+
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+ printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)",
+ pcie_ep ? "End Point": "Root Complex",
pci_info[num].regs);
+ last_busno = fsl_pci_init_port(&pci_info[num],
+ &pcie2_hose, first_free_busno);
+ first_free_busno = last_busno;
+ num++;
+ } else {
+ printf (" PCIE2: disabled\n");
+ }
+#else
+ set_bits32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */
+#endif
+
+#ifdef CONFIG_PCIE1
+ SET_STD_PCIE_INFO(pci_info[num], 1);
+
+ pcie_ep = (host_agent <= 1) || (host_agent == 4) ||
+ (host_agent == 5);
+ pcie_configured = (io_sel == 0xE);
+
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+ printf ("\n PCIE1 connected to Slot 2 as %s (base address %x)",
+ pcie_ep ? "End Point" : "Root Complex",
+ pci_info[num].regs);
+ last_busno = fsl_pci_init_port(&pci_info[num],
+ &pcie1_hose, first_free_busno);
+ first_free_busno = last_busno;
+ num++;
+ } else {
+ printf (" PCIE1: disabled\n");
+ }
+#else
+ set_bits32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
+#endif
+}
+
+void ft_pci_board_setup(void *blob)
+{
+#ifdef CONFIG_PCIE2
+ ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
+#endif
+#ifdef CONFIG_PCIE1
+ ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
+#endif
+}
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 9591641..6d44d6c 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -35,6 +35,12 @@
#define CONFIG_E500 1 /* BOOKE e500 family */
#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/P1020/P2020,etc*/
#define CONFIG_FSL_ELBC 1 /* Enable eLBC Support */
+#define CONFIG_PCI 1 /* Enable PCI/PCIE */
+#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */
+#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
+#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
--
1.5.6.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
