On Sat, 6 Feb 2016 15:28:26 +0100 Anatolij Gustschin ag...@denx.de wrote: > From: Vishwas Srivastava <vishu.ker...@gmail.com> > > emac module of the davinci platform supports only 8 tx and 8 > rx channels (total 16). emac driver for davinci platform, > however, while doing initialization of the dma descriptor > head pointers, wrongly initializes the 16 head pointers > (instead of 8) for tx dma and 16 head pointers (insted of 8) > for rx dma, which is wrong. The result is, that this register > initilization spills over the other registers which was not > intended and is undesirable. This patch fixes this problem. > > Signed-off-by: Vishwas Srivastava <vishu.ker...@gmail.com> > CC: Joe Hershberger <joe.hershber...@ni.com> > Acked-by: Joe Hershberger <joe.hershber...@ni.com> > Signed-off-by: Anatolij Gustschin <ag...@denx.de> > --- > > Changes for v4: > - slightly edit the commit message > - prepare properly formated patch > > Changes for v3: > - Added the missing patch part of v2 > > Changes for v2: > - cleaned up the style format > - addressed various comments given by Joe > > drivers/net/davinci_emac.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-)
Applied to u-boot-staging, thanks! -- Anatolij _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot