Hi, On 11 February 2016 at 08:54, Stefan Roese <s...@denx.de> wrote: > On 11.02.2016 16:49, Marek Vasut wrote: >> >> On 02/11/2016 04:45 PM, Stefan Roese wrote: >>> >>> With commit c32a6fd0 [net: Don't call board/cpu_eth_init() with driver >>> model], cpu_eth_init() is not called on SoCFPGA any more. Since this >>> function configures the internal PHY interface to RGMII (via the physel_X >>> bits), its still needed. So lets rename this function and call it in >>> arch_early_init_r(). >>> >>> Tested on socfpga_sr1500. >>> >>> Signed-off-by: Stefan Roese <s...@denx.de> >>> Cc: Simon Glass <s...@chromium.org> >>> Cc: Dinh Nguyen <dingu...@opensource.altera.com> >>> Cc: Marek Vasut <ma...@denx.de> >>> --- >>> arch/arm/mach-socfpga/misc.c | 6 +++++- >>> 1 file changed, 5 insertions(+), 1 deletion(-) >>> >>> diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c >>> index 9b43b92..2b1cd4a 100644 >>> --- a/arch/arm/mach-socfpga/misc.c >>> +++ b/arch/arm/mach-socfpga/misc.c >>> @@ -104,7 +104,7 @@ static void dwmac_deassert_reset(const unsigned int >>> of_reset_id) >>> socfpga_per_reset(reset, 0); >>> } >> >> >> I just sent and applied very similar patch, can you try >> u-boot-socfpga/master and see if it works for you? > > > Done and works just fine. So please feel free to upstream your patch > version.
Can this be done in the driver? You have a device tree representation I think. If you are using the compat list in fdtdec.c then it suggests that you need a driver. Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot