On 15/02/16 14:09, Stuart Longland wrote: > I ask again: Is there somewhere else I should be looking for the cause > of the above issue?
Well, found my issue in the end I think. In exasperation I dd'ed one of my working SD card images, proved that the machine booted, then dd'ed the newly build U-Boot image over the top of the old U-Boot partition. It worked. So I'll put this down to the i.MX286 boot ROM being *exceptionally* picky about partition placement. If things aren't *exactly* right, it'll flatly refuse to work. I might see if I can reproduce the bad image and hex-dump it to better understand what was "wrong". -- Stuart Longland Systems Engineer _ ___ \ /|_) | T: +61 7 3535 9619 \/ | \ | 38b Douglas Street F: +61 7 3535 9699 SYSTEMS Milton QLD 4064 http://www.vrt.com.au _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot