Hello Michal,
Am 17.02.2016 um 09:42 schrieb Michal Simek:
Hi Stephen,
On 16.2.2016 22:38, Stephen Warren wrote:
On 02/16/2016 12:08 PM, Michal Simek wrote:
Hi Stephen,
2016-02-16 17:39 GMT+01:00 Stephen Warren <swar...@wwwdotorg.org
<mailto:swar...@wwwdotorg.org>>:
On 02/16/2016 09:04 AM, Michal Simek wrote:
Hi Heiko,
On 16.2.2016 14:32, Heiko Schocher wrote:
Hello Michal,
Am 16.02.2016 um 13:12 schrieb Michal Simek:
Hi Stephen,
trying to run the latest testing on zynq board and
getting this
main_signon error.
This is what I am running
./test/py/test.py --bd zynq_zc702 --build
--board-identity zc702
and getting below.
Does this board has SPL support without SPL serial output?
I do load u-boot via jtag that's why SPL logs are not visible.
If so, can you try my patch:
http://patchwork.ozlabs.org/patch/583348/
I have applied your patch but it is still not working.
If I run full flow with SPL then I can't see any issue.
I assume this is resolved then?
Unfortunately both cases should work because SPL is not only one first
stage bootloader
which can be used. I didn't test zynqmp but there is no SPL and the same
problem is
probably there too. Or is there any dependency that if SPL is not build
than testing system
is not expecting it?
I will look tmr at jtag boot mode with SPL if I can get it work.
The test scripts currently assume that if SPL is enabled in the U-Boot
configuration file, then U-Boot SPL will run and print its signon
message to the serial console. If you're starting U-Boot using a
technique that invalidates this assumption, it won't work currently, as
you found.
It's pretty easy to add a flag in the boardenv file to tell the system
not to expect SPL signon. If you take a look at my second suggestion in:
http://lists.denx.de/pipermail/u-boot/2016-February/245759.html
[U-Boot] [PATCH] test/py: only check for SPL signature if SPL uses
serial output
... then it's probably a simple as adding a third variable into the if
condition, where that variable gets looks up from the "board
environment", similar to:
spl_skipped = u_boot_console.config.env.get('env__spl_skipped', False)
ok. I see. Anyway I have done this change locally and it is working good.
Heiko: Are you able to add this one more checking to your patch? Or
should I wait till you add your patch to the tree?
I just posted a v2 of my patch ... I vote, that you send your patch
based on mine to the ML.
bye,
Heiko
Stephen: Do you have your u-boot-test-hooks for qemu?
Thanks,
Michal
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
