On Tue, Feb 02, 2016 at 12:46:13PM +0800, Wenyou Yang wrote:
> Due to introducing the PMC_PLLICPR init function, use this
> function to clean up the code.
>
> Signed-off-by: Wenyou Yang <wenyou.y...@atmel.com>
> Tested-by: Heiko Schocher <h...@denx.de>
Reviewed-by: Andreas Bießmann <andreas.de...@googlemail.com>
> ---
>
> Changes in v3: None
> Changes in v2: None
>
> arch/arm/mach-at91/spl_at91.c | 5 +----
> 1 file changed, 1 insertion(+), 4 deletions(-)
>
> diff --git a/arch/arm/mach-at91/spl_at91.c b/arch/arm/mach-at91/spl_at91.c
> index b19f95b..cc3341a 100644
> --- a/arch/arm/mach-at91/spl_at91.c
> +++ b/arch/arm/mach-at91/spl_at91.c
> @@ -14,7 +14,6 @@
> #include <asm/arch/at91_common.h>
> #include <asm/arch/at91sam9_matrix.h>
> #include <asm/arch/at91_pit.h>
> -#include <asm/arch/at91_pmc.h>
> #include <asm/arch/at91_rstc.h>
> #include <asm/arch/at91_wdt.h>
> #include <asm/arch/clk.h>
> @@ -77,8 +76,6 @@ void __weak spl_board_init(void)
>
> void board_init_f(ulong dummy)
> {
> - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> -
> lowlevel_clock_init();
> at91_disable_wdt();
>
> @@ -86,7 +83,7 @@ void board_init_f(ulong dummy)
> * At this stage the main oscillator is supposed to be enabled
> * PCK = MCK = MOSC
> */
> - writel(0x00, &pmc->pllicpr);
> + at91_pllicpr_init(0x00);
>
> /* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
> at91_plla_init(CONFIG_SYS_AT91_PLLA);
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
