From: Lokesh Vutla <lokeshvu...@ti.com> The maximum device and arm speeds can be determined by reading EFUSE_BOOTROM register. As there is already a framework for reading this register, adding support for all possible speeds on k2g devices.
Signed-off-by: Lokesh Vutla <lokeshvu...@ti.com> Signed-off-by: Nishanth Menon <n...@ti.com> --- arch/arm/mach-keystone/clock.c | 7 +++- arch/arm/mach-keystone/include/mach/clock-k2g.h | 4 +- arch/arm/mach-keystone/include/mach/clock.h | 4 ++ board/ti/ks2_evm/board_k2g.c | 50 +++++++++++++++++++++++-- 4 files changed, 57 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-keystone/clock.c b/arch/arm/mach-keystone/clock.c index 1ae3baf982a1..b25db1e3fede 100644 --- a/arch/arm/mach-keystone/clock.c +++ b/arch/arm/mach-keystone/clock.c @@ -238,8 +238,11 @@ static int get_max_speed(u32 val, u32 speed_supported, int *spds) return spds[speed]; } - /* If no bit is set, use SPD800 */ - return SPD800; + /* If no bit is set, return minimum speed */ + if (cpu_is_k2g()) + return SPD200; + else + return SPD800; } static inline u32 read_efuse_bootrom(void) diff --git a/arch/arm/mach-keystone/include/mach/clock-k2g.h b/arch/arm/mach-keystone/include/mach/clock-k2g.h index 214c1d3a8360..74de6202fe50 100644 --- a/arch/arm/mach-keystone/include/mach/clock-k2g.h +++ b/arch/arm/mach-keystone/include/mach/clock-k2g.h @@ -12,8 +12,8 @@ #define PLLSET_CMD_LIST "<pa|arm|ddr3>" -#define DEV_SUPPORTED_SPEEDS 0xfff -#define ARM_SUPPORTED_SPEEDS 0xfff +#define DEV_SUPPORTED_SPEEDS 0x1ff +#define ARM_SUPPORTED_SPEEDS 0xff #define KS2_CLK1_6 sys_clk0_6_clk diff --git a/arch/arm/mach-keystone/include/mach/clock.h b/arch/arm/mach-keystone/include/mach/clock.h index dfebcb03ea57..72724aa4a912 100644 --- a/arch/arm/mach-keystone/include/mach/clock.h +++ b/arch/arm/mach-keystone/include/mach/clock.h @@ -63,8 +63,12 @@ #define CLOCK_INDEXES_LIST CLK_LIST(GENERATE_INDX_STR) enum { + SPD200, + SPD400, + SPD600, SPD800, SPD850, + SPD900, SPD1000, SPD1200, SPD1250, diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c index cdeb056a76c4..b62c41225039 100644 --- a/board/ti/ks2_evm/board_k2g.c +++ b/board/ti/ks2_evm/board_k2g.c @@ -23,22 +23,64 @@ unsigned int external_clk[ext_clk_count] = { [uart_clk] = SYS_CLK, }; -static struct pll_init_data main_pll_config = {MAIN_PLL, 100, 1, 4}; -static struct pll_init_data tetris_pll_config = {TETRIS_PLL, 100, 1, 4}; +static int arm_speeds[DEVSPEED_NUMSPDS] = { + SPD400, + SPD600, + SPD800, + SPD900, + SPD1000, + SPD900, + SPD800, + SPD600, + SPD400, + SPD200, +}; + +static int dev_speeds[DEVSPEED_NUMSPDS] = { + SPD600, + SPD800, + SPD900, + SPD1000, + SPD900, + SPD800, + SPD600, + SPD400, +}; + +static struct pll_init_data main_pll_config[NUM_SPDS] = { + [SPD400] = {MAIN_PLL, 100, 3, 2}, + [SPD600] = {MAIN_PLL, 300, 6, 2}, + [SPD800] = {MAIN_PLL, 200, 3, 2}, + [SPD900] = {TETRIS_PLL, 75, 1, 2}, + [SPD1000] = {TETRIS_PLL, 250, 3, 2}, +}; + +static struct pll_init_data tetris_pll_config[NUM_SPDS] = { + [SPD200] = {TETRIS_PLL, 250, 3, 10}, + [SPD400] = {TETRIS_PLL, 100, 1, 6}, + [SPD600] = {TETRIS_PLL, 100, 1, 4}, + [SPD800] = {TETRIS_PLL, 400, 3, 4}, + [SPD900] = {TETRIS_PLL, 75, 1, 2}, + [SPD1000] = {TETRIS_PLL, 250, 3, 2}, +}; + static struct pll_init_data uart_pll_config = {UART_PLL, 64, 1, 4}; static struct pll_init_data nss_pll_config = {NSS_PLL, 250, 3, 2}; static struct pll_init_data ddr3_pll_config = {DDR3A_PLL, 250, 3, 10}; struct pll_init_data *get_pll_init_data(int pll) { + int speed; struct pll_init_data *data = NULL; switch (pll) { case MAIN_PLL: - data = &main_pll_config; + speed = get_max_dev_speed(dev_speeds); + data = &main_pll_config[speed]; break; case TETRIS_PLL: - data = &tetris_pll_config; + speed = get_max_arm_speed(arm_speeds); + data = &tetris_pll_config[speed]; break; case NSS_PLL: data = &nss_pll_config; -- 2.7.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot