Dear U-Boot support, I'm migrating to new U-Boot version from 2013 and now have Ethernet not working both in U-Boot and in Linux (after booting).
I have custom board with Altera Arria 5 SocFpga onboard. U-Boot version: 2016.03-rc1 In logs I can see: Net: No ethernet found. With more verbose: designware_eth_probe, iobase=ff702000, priv=1eb286a0 ethernet@ff702000 PHY: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 not found designware_eth_probe, ret=-19 No ethernet found. Ethernet connection inside my board is following: [CPU] ----- [EMAC1] ----- [ FPGA ] ---- [ PHY(KSZ8081MNXIA) ] I already tried to configure FPGA from Linux environment but it didn't solved the problem. My U-Boot configuration was cloned from socfpga dev kit board with some modifications. But Ethernet configuration I didn't touched yet. So far I tried to debug it with no success. Also I played with env variables (ethact, ethaddr) and CONFIG_PHY_ADDR with no success as well. Something tells me that I have incorrect EMAC configuration but I don't know how to tackle it. Please help me identify the problem or at least give me some hints where to look to solve my issue. Best regards, Denis Bakhvalov _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot