On Mon, Mar 07, 2016 at 08:33:33PM -0500, Tom Rini wrote: > On Mon, Mar 07, 2016 at 06:24:05PM -0600, Derald D. Woods wrote: > > On Mon, Mar 07, 2016 at 06:36:56PM -0500, Tom Rini wrote: > > > On Sat, Mar 05, 2016 at 01:19:59PM -0600, Derald D. Woods wrote: > > > > > > > - Add required UBI/UBIFS config definitions > > > > - Add reasonable MTD partition layout > > > > - Remove JFFS2 config definitions > > > > - Drop some CFI verbage and definitions > > > > - Make comment 'one-liners' truly one line > > > > - Improve readability and content arrangement > > > > > > > > Signed-off-by: Derald D. Woods <woods.techni...@gmail.com> > > > > > > Reviewed-by: Tom Rini <tr...@konsulko.com> > > > > > > ... but we shouldn't be adding more extra options, we should be > > > converting to Kconfig. Any chance you can find some time to work on > > > starting to convert some of that over for this board at least? Thanks! > > > > What is the best example of it being done correctly? For OMAP3, I have > > an older BeagleBoard Rev. C4 and the AM3517 EXP to work with. I also > > have a SAMA5D3 xplained, with an Atmel SoC, and the iMX233 OlinuXino > > MAXI. > > In this case it's not about board, but about options. CONFIG_NAND needs > to go away in favour of NAND being an option in > drivers/mtd/nand/Kconfig, and include/configs/ cleaned out. > ./tools/moveconfig.py can help here. > > -- > Tom
Thanks. That clarifies things a bit. This will nudge me more towards proper config generation with Kconfig. -- Derald _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot