Please ignore....forgot that I'd added all the relevant emails to my git config. CK
On 17 March 2016 at 14:33, <codekip...@gmail.com> wrote: > From: Marcus Cooper <codekip...@gmail.com> > > --- > arch/arm/dts/Makefile | 1 + > arch/arm/dts/sun7i-a20-itead-core-evb.dts | 316 > ++++++++++++++++++++++++++++++ > configs/Itead_Core_EVB_defconfig | 22 +++ > 3 files changed, 339 insertions(+) > create mode 100644 arch/arm/dts/sun7i-a20-itead-core-evb.dts > create mode 100644 configs/Itead_Core_EVB_defconfig > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index b574284..dae2bfc 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -162,6 +162,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ > sun7i-a20-cubietruck.dtb \ > sun7i-a20-hummingbird.dtb \ > sun7i-a20-i12-tvbox.dtb \ > + sun7i-a20-itead-core-evb.dtb \ > sun7i-a20-lamobo-r1.dtb \ > sun7i-a20-m3.dtb \ > sun7i-a20-m5.dtb \ > diff --git a/arch/arm/dts/sun7i-a20-itead-core-evb.dts > b/arch/arm/dts/sun7i-a20-itead-core-evb.dts > new file mode 100644 > index 0000000..140f0dd > --- /dev/null > +++ b/arch/arm/dts/sun7i-a20-itead-core-evb.dts > @@ -0,0 +1,316 @@ > +/* > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > +#include "sun7i-a20.dtsi" > +#include "sunxi-common-regulators.dtsi" > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/interrupt-controller/irq.h> > +#include <dt-bindings/pinctrl/sun4i-a10.h> > + > +/ { > + model = "Itead Core EVB"; > + compatible = "itead,core-evb", "allwinner,sun7i-a20"; > + > + aliases { > + serial0 = &uart0; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&led_pins_itead_core_evb>; > + > + blue { > + label = "itead_core_evb:blue:usr"; > + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; > + }; > + > + orange { > + label = "itead_core_evb:orange:usr"; > + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; > + }; > + > + white { > + label = "itead_core_evb:white:usr"; > + gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; > + }; > + > + green { > + label = "itead_core_evb:green:usr"; > + gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; > + }; > + }; > + > + mmc3_pwrseq: mmc3_pwrseq { > + compatible = "mmc-pwrseq-simple"; > + pinctrl-names = "default"; > + pinctrl-0 = <&mmc3_pwrseq_pin_itead_core_evb>; > + reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ > + }; > +}; > + > +&ahci { > + target-supply = <®_ahci_5v>; > + status = "okay"; > +}; > + > +&cpu0 { > + cpu-supply = <®_dcdc2>; > +}; > + > +&ehci0 { > + status = "okay"; > +}; > + > +&ehci1 { > + status = "okay"; > +}; > + > +&gmac { > + pinctrl-names = "default"; > + pinctrl-0 = <&gmac_pins_rgmii_a>; > + phy = <&phy1>; > + phy-mode = "rgmii"; > + status = "okay"; > + > + phy1: ethernet-phy@1 { > + reg = <1>; > + }; > +}; > + > +&i2c0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c0_pins_a>; > + status = "okay"; > + > + axp209: pmic@34 { > + reg = <0x34>; > + interrupt-parent = <&nmi_intc>; > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > + }; > +}; > + > +&i2c1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c1_pins_a>; > + status = "okay"; > +}; > + > +&i2c2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c2_pins_a>; > + status = "okay"; > +}; > + > +&ir0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&ir0_rx_pins_a>; > + status = "okay"; > +}; > + > +&mmc0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; > + vmmc-supply = <®_vcc3v3>; > + bus-width = <4>; > + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ > + cd-inverted; > + status = "okay"; > +}; > + > +&mmc3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&mmc3_pins_a>; > + vmmc-supply = <®_vcc3v3>; > + mmc-pwrseq = <&mmc3_pwrseq>; > + bus-width = <4>; > + non-removable; > + status = "okay"; > + > + brcmf: bcrmf@1 { > + reg = <1>; > + compatible = "brcm,bcm4329-fmac"; > + interrupt-parent = <&pio>; > + interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */ > + interrupt-names = "host-wake"; > + }; > +}; > + > +&mmc3_pins_a { > + /* AP6210 requires pull-up */ > + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; > +}; > + > +&ohci0 { > + status = "okay"; > +}; > + > +&ohci1 { > + status = "okay"; > +}; > + > +&otg_sram { > + status = "okay"; > +}; > + > +&pio { > + ahci_pwr_pin_itead_core_evb: ahci_pwr_pin@1 { > + allwinner,pins = "PH12"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + > + led_pins_itead_core_evb: led_pins@0 { > + allwinner,pins = "PH7", "PH11", "PH20", "PH21"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + > + mmc3_pwrseq_pin_itead_core_evb: mmc3_pwrseq_pin@0 { > + allwinner,pins = "PH9"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + > + usb0_vbus_pin_a: usb0_vbus_pin@0 { > + allwinner,pins = "PH17"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + > + usb0_id_detect_pin: usb0_id_detect_pin@0 { > + allwinner,pins = "PH19"; > + allwinner,function = "gpio_in"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + > + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { > + allwinner,pins = "PH22"; > + allwinner,function = "gpio_in"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > +}; > + > +&pwm { > + pinctrl-names = "default"; > + pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>; > + status = "okay"; > +}; > + > +®_ahci_5v { > + pinctrl-0 = <&ahci_pwr_pin_itead_core_evb>; > + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +#include "axp209.dtsi" > + > +®_dcdc2 { > + regulator-always-on; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1450000>; > + regulator-name = "vdd-cpu"; > +}; > + > +®_dcdc3 { > + regulator-always-on; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1400000>; > + regulator-name = "vdd-int-dll"; > +}; > + > +®_ldo1 { > + regulator-name = "vdd-rtc"; > +}; > + > +®_ldo2 { > + regulator-always-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-name = "avcc"; > +}; > + > +®_usb0_vbus { > + pinctrl-0 = <&usb0_vbus_pin_a>; > + gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +®_usb1_vbus { > + status = "okay"; > +}; > + > +®_usb2_vbus { > + status = "okay"; > +}; > + > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_pins_a>; > + status = "okay"; > +}; > + > +&usb_otg { > + dr_mode = "otg"; > + status = "okay"; > +}; > + > +&usbphy { > + pinctrl-names = "default"; > + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; > + usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ > + usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ > + usb0_vbus-supply = <®_usb0_vbus>; > + usb1_vbus-supply = <®_usb1_vbus>; > + usb2_vbus-supply = <®_usb2_vbus>; > + status = "okay"; > +}; > diff --git a/configs/Itead_Core_EVB_defconfig > b/configs/Itead_Core_EVB_defconfig > new file mode 100644 > index 0000000..bb9014b > --- /dev/null > +++ b/configs/Itead_Core_EVB_defconfig > @@ -0,0 +1,22 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_SUNXI=y > +CONFIG_MACH_SUN7I=y > +CONFIG_DRAM_CLK=432 > +CONFIG_MMC0_CD_PIN="PH1" > +CONFIG_USB0_VBUS_PIN="PH17" > +CONFIG_USB0_VBUS_DET="PH22" > +CONFIG_USB0_ID_DET="PH19" > +CONFIG_VIDEO_VGA=y > +CONFIG_GMAC_TX_DELAY=1 > +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-itead-core-evb" > +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > +CONFIG_SPL=y > +CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12)" > +# CONFIG_CMD_IMLS is not set > +# CONFIG_CMD_FLASH is not set > +# CONFIG_CMD_FPGA is not set > +CONFIG_CMD_GPIO=y > +CONFIG_ETH_DESIGNWARE=y > +CONFIG_USB_EHCI_HCD=y > +CONFIG_USB_MUSB_GADGET=y > + > -- > 2.7.3 > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot