Hi Kevin,
On 01.09.2015 14:52, Stefan Roese wrote:
Hi Kevin,
(Added Luka to Cc, as the Marvell / MVEBU custodian)
On 31.08.2015 22:30, Kevin Smith wrote:
On some processors such as Armada 38x, if the hardware-
configured boot mode fails, the CPU falls back to booting over
UART. When this happens the chip prints a failure message, waits
for the magic sequence and, when it is received, prints a
"(boot)" message, then sends a NAK to start the transfer.
This breaks the current kwboot behavior because the xmodem
transfer only tries to read one character after the magic
sequence, looking for the NAK. Instead it gets the "(boot)"
text, and retries the magic sequence. The CPU thinks the
repeated sequence is part of the packet, stops NAKing, and one
side or another eventually times out.
This patch adds support for a fallback mode which continues to
scan for a NAK in the characters received after the sequence,
printing out any non-NAK characters. This allows kwboot to skip
the "(boot)" message, find the NAK, and start the transfer
successfully.
Signed-off-by: Kevin Smith <kevin.sm...@elecsyscorp.com>
I've not seen this "(boot)" yet. But the patch looks good. So:
Reviewed-by: Stefan Roese <s...@denx.de>
Is this patch still needed (or helpful)? If yes, please rebase
on top of latest u-boot-marvell/master and send a new version
so that I can pick it up.
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
