Hi Michael,
On 24-03-16 07:46, Michael Haas wrote:
This patch is required to get reliable 1000BASE-T operation on some
boards using the RTL8211C(L) PHY.
Following discussions on v2 of this patch, I have removed the incorrect
check for the RTL8211C(L). Affected boards now have to define
CONFIG_RTL8211X_PHY_FORCE_MASTER to benefit from the fix.
Note that this patch requires Karsten Merkers '[PATCH] net: phy: Realtek
RTL8211B/C PHY ID fix' as well as Hans de Goede's recent u-boot-sunxi
pull request, specifically 1eae8f66ff749409eb96e2f3f3387c56232d0b8a and
fc8991c61c393ce6a9d3dfc97cb56dbbd9e8cbba.
Thanks for this patch series. I believe you should
squash patch 4 into patch 1, as that is where it belongs
IMHO.
Also note that patch 2/3 will not do anything unless patch 4
is also applied setting CONFIG_FOO in a defconfig does not do
anything unless CONFIG_FOO is defined in Kconfig.
Regards,
Hans
Michael
Changes in v3:
- Remove incorrect detection of RTL8211CL and use #ifdef instead
(thanks to Karsten Merker)
- Introduced constants for register bits
Changes in v2:
- Removed accidental inclusion of Karsten's patch in my first submission of
this series.
- Fix a typo in the code: 6 -> &
Michael Haas (4):
net: phy: Optionally force master mode for RTL PHY
net: phy: Force master mode for A20-Olimex-SOM-EVB
net: phy: Force master mode A20-OLinuXino-Lime2
net: phy: Add RTL8211X_PHY_FORCE_MASTER to Kconfig
configs/A20-OLinuXino-Lime2_defconfig | 1 +
configs/A20-Olimex-SOM-EVB_defconfig | 1 +
drivers/net/Kconfig | 17 +++++++++++++++++
drivers/net/phy/realtek.c | 13 ++++++++++++-
4 files changed, 31 insertions(+), 1 deletion(-)
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
