On 03/22/2016 10:41 PM, Saksham Jain wrote: > During Secure Boot, a bootscript is validated using its header. This > patch copies both these images to DDR from NOR and then validates and > executed them from DDR. (If NOR is the boot source for LS2080). > > This copy step is done to make this step common across booting sources. > Because in case of non-xip memories (e.g. NAND, SD) it is neccessary to > copy both these images to DDR. > > For other ARM Platforms (ls1043 and ls1020), header is not copied from > NOR to DDR (otherwise customers will need to modify the existing > headers). > > Signed-off-by: Aneesh Bansal <aneesh.ban...@nxp.com> > Signed-off-by: Saksham Jain <saksham.j...@nxp.com> > --- > Changes for v2: > - for platform such as ls1043 and ls1021, boot header in NOR. > Not copied to NOR. For them, fixed CONFIG_BOOTSCRIPT_HDR_ADDR > to CONFIG_BS_HDR_ADDR_FLASH. > Changes for v3: > - No change > Changes for v4: > -Cleaned up commit message > Changes for v5: > - Cleaned up commit message > > > arch/arm/include/asm/fsl_secure_boot.h | 28 +++++++++++++++++++++++++--- > include/config_fsl_chain_trust.h | 11 +++++++---- > 2 files changed, 32 insertions(+), 7 deletions(-) >
Change to subject and commit message. Applied to u-boot-fsl-qoriq master. Awaiting upstream. Thanks. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
