With the addition of GPIO_ACTIVE_LOW parsing in gpio-uclass,
the omap gpio driver doesn't need a custom xlate routine.
Signed-off-by: Eric Nelson <e...@nelint.com>
---
drivers/gpio/omap_gpio.c | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/drivers/gpio/omap_gpio.c b/drivers/gpio/omap_gpio.c
index 93d18e4..5ab53bc 100644
--- a/drivers/gpio/omap_gpio.c
+++ b/drivers/gpio/omap_gpio.c
@@ -277,22 +277,12 @@ static int omap_gpio_get_function(struct udevice *dev,
unsigned offset)
return GPIOF_INPUT;
}
-static int omap_gpio_xlate(struct udevice *dev, struct gpio_desc *desc,
- struct fdtdec_phandle_args *args)
-{
- desc->offset = args->args[0];
- desc->flags = args->args[1] & GPIO_ACTIVE_LOW ? GPIOD_ACTIVE_LOW : 0;
-
- return 0;
-}
-
static const struct dm_gpio_ops gpio_omap_ops = {
.direction_input = omap_gpio_direction_input,
.direction_output = omap_gpio_direction_output,
.get_value = omap_gpio_get_value,
.set_value = omap_gpio_set_value,
.get_function = omap_gpio_get_function,
- .xlate = omap_gpio_xlate,
};
static int omap_gpio_probe(struct udevice *dev)
--
2.6.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
