Hi,
On 03/31/2016 11:24 PM, Borsodi Petr wrote:
Hi all,
I found a problem with load command on ARM based board. When I load hello_world
standalone application using filesystem load command, the u-boot crashes.
Loading with loads is OK.
I think that the problem is caused by cache inconsistency. If I add calling the
flush_cache function, problem is solved.
I also ran into cache inconsistency problems when copying the stand
alone from NOR flash to RAM. I was using Freescale 85xx SOC.
Based on a few email conversations I had at the time, I added
http://www.denx.de/wiki/view/DULG/UBootStandalone#Section_5.12.3.
Maybe you will find something useful.
Jim
Petr Borsodi
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
--
Jim Chargin
AJA Video Systems j...@aja.com
(530) 271-3334 http://www.aja.com
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot