On 04/08/2016 07:29 AM, Michal Simek wrote: > On 8.4.2016 14:05, Dan Murphy wrote: >> On 04/08/2016 04:25 AM, Michal Simek wrote: >>> On 7.4.2016 18:02, Dan Murphy wrote: >>>> Mugunthan >>>> >>>> On 04/06/2016 11:45 PM, Mugunthan V N wrote: >>>>> On Wednesday 06 April 2016 05:07 PM, Dan Murphy wrote: >>>>>> Add the device tree bindings and the accompanying documentation >>>>>> for the TI DP83867 Giga bit ethernet phy driver. >>>>>> >>>>>> The original document was from: >>>>>> [commit 2a10154abcb75ad0d7b6bfea6210ac743ec60897 from the Linux >>>>>> kernel] >>>>>> >>>>>> Signed-off-by: Dan Murphy <dmur...@ti.com> >>>>>> --- >>>>>> >>>>>> v3 - Modify the binding to the kernel changed int -> internal for the >>>>>> delay - https://patchwork.ozlabs.org/patch/606595/ >>>>>> >>>>>> doc/device-tree-bindings/net/ti,dp83867.txt | 29 >>>>>> ++++++++++++++++++++++++ >>>>>> include/dt-bindings/net/ti-dp83867.h | 35 >>>>>> +++++++++++++++++++++++++++++ >>>>>> 2 files changed, 64 insertions(+) >>>>>> create mode 100644 doc/device-tree-bindings/net/ti,dp83867.txt >>>>>> create mode 100644 include/dt-bindings/net/ti-dp83867.h >>>>>> >>>>>> diff --git a/doc/device-tree-bindings/net/ti,dp83867.txt >>>>>> b/doc/device-tree-bindings/net/ti,dp83867.txt >>>>>> new file mode 100644 >>>>>> index 0000000..0ec009c >>>>>> --- /dev/null >>>>>> +++ b/doc/device-tree-bindings/net/ti,dp83867.txt >>>>>> @@ -0,0 +1,29 @@ >>>>>> +* Texas Instruments - dp83867 Giga bit ethernet phy >>>>>> + >>>>>> +Required properties: >>>>>> + - ti,rx-internal-delay - RGMII Recieve Clock Delay - see >>>>>> dt-bindings/net/ti-dp83867.h >>>>>> + for applicable values >>>>>> + - ti,tx-internal-delay - RGMII Transmit Clock Delay - see >>>>>> dt-bindings/net/ti-dp83867.h >>>>>> + for applicable values >>>>>> + - ti,fifo-depth - Transmitt FIFO depth- see >>>>>> dt-bindings/net/ti-dp83867.h >>>>>> + for applicable values >>>>>> + >>>>>> +Default child nodes are standard Ethernet PHY device >>>>>> +nodes as described in doc/devicetree/bindings/net/ethernet.txt >>>>>> + >>>>>> +Example: >>>>>> + >>>>>> +&mac { >>>>>> + pinctrl-0 = <&davinci_mdio_default>; >>>>>> + pinctrl-1 = <&davinci_mdio_sleep>; >>>>>> + status = "okay"; >>>>>> + >>>>>> + ti,rx_internal_delay = <DP83867_RGMIIDCTL_1_50_NS>; >>>>>> + ti,tx_internal_delay = <DP83867_RGMIIDCTL_2_50_NS>; >>>>>> + ti,fifo_depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; >>>>>> + >>>>>> +}; >>>>> This example should in phy node and not in mac node as per the linux >>>>> commmit mentioned above? >>>> Are you saying that the code should look like this >>>> >>>> &mac { >>>> pinctrl-0 = <&davinci_mdio_default>; >>>> pinctrl-1 = <&davinci_mdio_sleep>; >>>> status = "okay"; >>>> phy-handle = <ðernet_phy>; >>>> >>>> ethernet_phy: ethernet-phy@0 { >>>> reg = <0>; >>>> ti,rx_int_delay = <DP83867_RGMIIDCTL_2_25_NS>; >>>> ti,tx_int_delay = <DP83867_RGMIIDCTL_2_75_NS>; >>>> ti,fifo_depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; >>>> }; >>>> >>>> This is the way it is in the kernel. >>> First of all. Please rebase your 2/2 on the top of current branch. >>> sgmii support was added recently. >> Yeah I had a feeling that I was going to need to do that. >> >>> Here is what I use on zynqmp. >>> http://lists.denx.de/pipermail/u-boot/2016-April/250866.html >>> And it reflects the description above. >> OK the zync_gem supports phy-handle. cpsw does not. Looks like I have >> to add a patch to cpsw. > yep but again your patch is failing on zynqmp. Because I don't think > there is hook to read that values from DT. > I didn't look at details but definitely please check it.
Actually this is a problem in the zynqmp mac driver. zynqmp reads the phy-handle and then dumps the information so the dp83867 or any phy driver for that matter is not getting the data. I will send a patch in to fix the zynqmp driver as well Dan > > Thanks, > Michal > > -- ------------------ Dan Murphy _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot