Adding Joe
On 04/11/2016 07:18 AM, Dan Murphy wrote:
> The code assumed that if the interface is not RGMII configured
> then it must be SGMII configured. This device has the ability
> to support most of the MII interfaces. Therefore add the
> helper for SGMII and only configure the device if the interface is
> configured for SGMII.
>
> Signed-off-by: Dan Murphy <dmur...@ti.com>
> ---
>
> v5 - No change
>
> drivers/net/phy/ti.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/net/phy/ti.c b/drivers/net/phy/ti.c
> index b1f1ec8..f881914 100644
> --- a/drivers/net/phy/ti.c
> +++ b/drivers/net/phy/ti.c
> @@ -219,7 +219,7 @@ static int dp83867_config(struct phy_device *phydev)
> (dp83867->fifo_depth <<
> DP83867_PHYCR_FIFO_DEPTH_SHIFT));
> if (ret)
> goto err_out;
> - } else {
> + } else if (phy_interface_is_sgmii(phydev)) {
> phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR,
> (BMCR_ANENABLE | BMCR_FULLDPLX | BMCR_SPEED1000));
>
--
------------------
Dan Murphy
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
