On Tuesday 12 April 2016 05:07 AM, Daniel Allred wrote:
> Adds an fdt.c file in that defines the ft_cpu_setup() function,
> which should be called from a board-specific ft_board_setup()).
> This ft_cpu_setup() will currently do nothing for non-secure (GP)
> devices but contains pertinent updates for booting on secure (HS)
> devices.
>
> Update the omap5 Makefile to include the fdt.c in the build.
Reviewed-by: Lokesh Vutla <lokeshvu...@ti.com>
Thanks and regards,
Lokesh
>
> Signed-off-by: Daniel Allred <d-all...@ti.com>
> Signed-off-by: Madan Srinivas <mad...@ti.com>
> ---
> arch/arm/cpu/armv7/omap5/Makefile | 1 +
> arch/arm/cpu/armv7/omap5/fdt.c | 183
> ++++++++++++++++++++++++++++++++++++++
> 2 files changed, 184 insertions(+)
> create mode 100644 arch/arm/cpu/armv7/omap5/fdt.c
>
> diff --git a/arch/arm/cpu/armv7/omap5/Makefile
> b/arch/arm/cpu/armv7/omap5/Makefile
> index f2930d5..3caba86 100644
> --- a/arch/arm/cpu/armv7/omap5/Makefile
> +++ b/arch/arm/cpu/armv7/omap5/Makefile
> @@ -12,4 +12,5 @@ obj-y += sdram.o
> obj-y += prcm-regs.o
> obj-y += hw_data.o
> obj-y += abb.o
> +obj-y += fdt.o
> obj-$(CONFIG_IODELAY_RECALIBRATION) += dra7xx_iodelay.o
> diff --git a/arch/arm/cpu/armv7/omap5/fdt.c b/arch/arm/cpu/armv7/omap5/fdt.c
> new file mode 100644
> index 0000000..f2f40f0
> --- /dev/null
> +++ b/arch/arm/cpu/armv7/omap5/fdt.c
> @@ -0,0 +1,183 @@
> +/*
> + * Copyright 2016 Texas Instruments, Inc.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <libfdt.h>
> +#include <fdt_support.h>
> +#include <malloc.h>
> +
> +#include <asm/omap_common.h>
> +#include <asm/arch-omap5/sys_proto.h>
> +
> +#ifdef CONFIG_TI_SECURE_DEVICE
> +
> +/* Give zero values if not already defined */
> +#ifndef CONFIG_SECURE_BOOT_SRAM
> +#define CONFIG_SECURE_BOOT_SRAM (0)
> +#endif
> +#ifndef CONFIG_SECURE_RUN_SRAM
> +#define CONFIG_SECURE_RUN_SRAM (0)
> +#endif
> +
> +static u32 hs_irq_skip[] = {
> + 8, /* Secure violation reporting interrupt */
> + 15, /* One interrupt for SDMA by secure world */
> + 118 /* One interrupt for Crypto DMA by secure world */
> +};
> +
> +static int ft_hs_fixup_crossbar(void *fdt, bd_t *bd)
> +{
> + const char *path;
> + int offs;
> + int ret;
> + int len, i, old_cnt, new_cnt;
> + u32 *temp;
> + const u32 *p_data;
> +
> + /*
> + * Increase the size of the fdt
> + * so we have some breathing room
> + */
> + ret = fdt_increase_size(fdt, 512);
> + if (ret < 0) {
> + printf("Could not increase size of device tree: %s\n",
> + fdt_strerror(ret));
> + return ret;
> + }
> +
> + /* Reserve IRQs that are used/needed by secure world */
> + path = "/ocp/crossbar";
> + offs = fdt_path_offset(fdt, path);
> + if (offs < 0) {
> + debug("Node %s not found.\n", path);
> + return 0;
> + }
> +
> + /* Get current entries */
> + p_data = fdt_getprop(fdt, offs, "ti,irqs-skip", &len);
> + if (p_data)
> + old_cnt = len / sizeof(u32);
> + else
> + old_cnt = 0;
> +
> + new_cnt = sizeof(hs_irq_skip) /
> + sizeof(hs_irq_skip[0]);
> +
> + /* Create new/updated skip list for HS parts */
> + temp = malloc(sizeof(u32) * (old_cnt + new_cnt));
> + for (i = 0; i < new_cnt; i++)
> + temp[i] = cpu_to_fdt32(hs_irq_skip[i]);
> + for (i = 0; i < old_cnt; i++)
> + temp[i + new_cnt] = p_data[i];
> +
> + /* Blow away old data and set new data */
> + fdt_delprop(fdt, offs, "ti,irqs-skip");
> + ret = fdt_setprop(fdt, offs, "ti,irqs-skip",
> + temp,
> + (old_cnt + new_cnt) * sizeof(u32));
> + free(temp);
> +
> + /* Check if the update worked */
> + if (ret < 0) {
> + printf("Could not add ti,irqs-skip property to node %s: %s\n",
> + path, fdt_strerror(ret));
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int ft_hs_disable_rng(void *fdt, bd_t *bd)
> +{
> + const char *path;
> + int offs;
> + int ret;
> +
> + /* Make HW RNG reserved for secure world use */
> + path = "/ocp/rng";
> + offs = fdt_path_offset(fdt, path);
> + if (offs < 0) {
> + debug("Node %s not found.\n", path);
> + return 0;
> + }
> + ret = fdt_setprop_string(fdt, offs,
> + "status", "disabled");
> + if (ret < 0) {
> + printf("Could not add status property to node %s: %s\n",
> + path, fdt_strerror(ret));
> + return ret;
> + }
> + return 0;
> +}
> +
> +#if (CONFIG_SECURE_BOOT_SRAM != 0) || (CONFIG_SECURE_RUN_SRAM != 0)
> +static int ft_hs_fixup_sram(void *fdt, bd_t *bd)
> +{
> + const char *path;
> + int offs;
> + int ret;
> + u32 temp[2];
> +
> + /*
> + * Update SRAM reservations on secure devices. The OCMC RAM
> + * is always reserved for secure use from the start of that
> + * memory region
> + */
> + path = "/ocp/ocmcram@40300000/sram-hs";
> + offs = fdt_path_offset(fdt, path);
> + if (offs < 0) {
> + debug("Node %s not found.\n", path);
> + return 0;
> + }
> +
> + /* relative start offset */
> + temp[0] = cpu_to_fdt32(0);
> + /* reservation size */
> + temp[1] = cpu_to_fdt32(max(CONFIG_SECURE_BOOT_SRAM,
> + CONFIG_SECURE_RUN_SRAM));
> + fdt_delprop(fdt, offs, "reg");
> + ret = fdt_setprop(fdt, offs, "reg", temp, 2 * sizeof(u32));
> + if (ret < 0) {
> + printf("Could not add reg property to node %s: %s\n",
> + path, fdt_strerror(ret));
> + return ret;
> + }
> +
> + return 0;
> +}
> +#else
> +static int ft_hs_fixup_sram(void *fdt, bd_t *bd) { return 0; }
> +#endif
> +
> +static void ft_hs_fixups(void *fdt, bd_t *bd)
> +{
> + /* Check we are running on an HS/EMU device type */
> + if (GP_DEVICE != get_device_type()) {
> + if ((ft_hs_fixup_crossbar(fdt, bd) == 0) &&
> + (ft_hs_disable_rng(fdt, bd) == 0) &&
> + (ft_hs_fixup_sram(fdt, bd) == 0))
> + return;
> + } else {
> + printf("ERROR: Incorrect device type (GP) detected!");
> + }
> + /* Fixup failed or wrong device type */
> + hang();
> +}
> +#else
> +static void ft_hs_fixups(void *fdt, bd_t *bd)
> +{
> +}
> +#endif
> +
> +/*
> + * Place for general cpu/SoC FDT fixups. Board specific
> + * fixups should remain in the board files which is where
> + * this function should be called from.
> + */
> +void ft_cpu_setup(void *fdt, bd_t *bd)
> +{
> + ft_hs_fixups(fdt, bd);
> +}
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
