On 04/19/2016 05:22 AM, Yang, Wenyou wrote: > Hi Marek, > >> -----Original Message----- >> From: Marek Vasut [mailto:marek.va...@gmail.com] >> Sent: 2016年4月18日 23:30 >> To: Yang, Wenyou <wenyou.y...@atmel.com> >> Cc: u-boot@lists.denx.de >> Subject: SAMA5D2 xplained SD/eMMC boot >> >> Hi! >> >> I've been playing around with latest mainline u-boot on sama5d2 xplained >> ultra. I >> noticed that if I want to boot the board from SD card (SDHCI1), the board >> will >> indeed load the SPL from it, but SPL will try to load u-boot.img from eMMC >> (SDHCI0) and fail, as my eMMC is blank. > > Yes, there is some issue to load u-boot.img. I found there is something to do > on sdhci.c. > > You can try this branch, it should works. > > https://github.com/linux4sam/u-boot-at91/commits/u-boot-2016.03-at91
I am not interested in using non-mainline stuff. Do you have any particular patch/commit which I can refer to ? I do not think this has anything to do with sdhci.c driver at all, it has to do with detecting the boot device from which SPL was started and loading u-boot.img from the same boot device instead of always using SDHCI0. >> This is a result of hard-coding boot >> device to >> BOOT_DEVICE_MMC1 in arch/arm/mach-at91/spl.c spl_boot_device() I think. >> >> Is there any way to discern from which SDHCI the board booted to continue >> loading u-boot.img from the correct one ? This would let us implement >> board_boot_order() and boot from correct SDHCI. >> >> -- >> Best regards, >> Marek Vasut > > > Best Regards, > Wenyou Yang > -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot