Hi Roger, > Just use ep->maxpacket to get the maxpacket size > and simplify the bulk-out maxpacket alignment. > > Signed-off-by: Roger Quadros <rog...@ti.com> > Tested-by: Steve Rae <s...@broadcom.com> > --- > drivers/usb/gadget/f_fastboot.c | 50 > +++++++++++++++++++---------------------- 1 file changed, 23 > insertions(+), 27 deletions(-) > > diff --git a/drivers/usb/gadget/f_fastboot.c > b/drivers/usb/gadget/f_fastboot.c index 7961231..28b244a 100644 > --- a/drivers/usb/gadget/f_fastboot.c > +++ b/drivers/usb/gadget/f_fastboot.c > @@ -39,6 +39,11 @@ > #define TX_ENDPOINT_MAXIMUM_PACKET_SIZE (0x0040) > > #define EP_BUFFER_SIZE 4096 > +/* > + * EP_BUFFER_SIZE must always be an integral multiple of maxpacket > size > + * (64 or 512 or 1024), else we break on certain controllers like > DWC3 > + * that expect bulk OUT requests to be divisible by maxpacket size. > + */ > > struct f_fastboot { > struct usb_function usb_function; > @@ -57,7 +62,6 @@ static struct f_fastboot *fastboot_func; > static unsigned int fastboot_flash_session_id; > static unsigned int download_size; > static unsigned int download_bytes; > -static bool is_high_speed; > > static struct usb_endpoint_descriptor fs_ep_in = { > .bLength = USB_DT_ENDPOINT_SIZE, > @@ -269,11 +273,6 @@ static int fastboot_set_alt(struct usb_function > *f, debug("%s: func: %s intf: %d alt: %d\n", > __func__, f->name, interface, alt); > > - if (gadget->speed == USB_SPEED_HIGH) > - is_high_speed = true; > - else > - is_high_speed = false; > - > d = fb_ep_desc(gadget, &fs_ep_out, &hs_ep_out); > ret = usb_ep_enable(f_fb->out_ep, d); > if (ret) { > @@ -455,20 +454,27 @@ static void cb_getvar(struct usb_ep *ep, struct > usb_request *req) fastboot_tx_write_str(response); > } > > -static unsigned int rx_bytes_expected(unsigned int maxpacket) > +static unsigned int rx_bytes_expected(struct usb_ep *ep) > { > int rx_remain = download_size - download_bytes; > - int rem = 0; > - if (rx_remain < 0) > + unsigned int rem; > + unsigned int maxpacket = ep->maxpacket; > + > + if (rx_remain <= 0) > return 0; > - if (rx_remain > EP_BUFFER_SIZE) > + else if (rx_remain > EP_BUFFER_SIZE) > return EP_BUFFER_SIZE; > - if (rx_remain < maxpacket) { > - rx_remain = maxpacket; > - } else if (rx_remain % maxpacket != 0) { > - rem = rx_remain % maxpacket; > + > + /* > + * Some controllers e.g. DWC3 don't like OUT transfers to be > + * not ending in maxpacket boundary. So just make them happy > by > + * always requesting for integral multiple of maxpackets. > + * This shouldn't bother controllers that don't care about > it. > + */ > + rem = rx_remain % maxpacket; > + if (rem > 0) > rx_remain = rx_remain + (maxpacket - rem); > - } > + > return rx_remain; > } > > @@ -480,7 +486,6 @@ static void rx_handler_dl_image(struct usb_ep > *ep, struct usb_request *req) const unsigned char *buffer = req->buf; > unsigned int buffer_size = req->actual; > unsigned int pre_dot_num, now_dot_num; > - unsigned int max; > > if (req->status != 0) { > printf("Bad status: %d\n", req->status); > @@ -518,11 +523,7 @@ static void rx_handler_dl_image(struct usb_ep > *ep, struct usb_request *req) > printf("\ndownloading of %d bytes finished\n", > download_bytes); } else { > - max = is_high_speed ? hs_ep_out.wMaxPacketSize : > - fs_ep_out.wMaxPacketSize; > - req->length = rx_bytes_expected(max); > - if (req->length < ep->maxpacket) > - req->length = ep->maxpacket; > + req->length = rx_bytes_expected(ep); > } > > req->actual = 0; > @@ -533,7 +534,6 @@ static void cb_download(struct usb_ep *ep, struct > usb_request *req) { > char *cmd = req->buf; > char response[FASTBOOT_RESPONSE_LEN]; > - unsigned int max; > > strsep(&cmd, ":"); > download_size = simple_strtoul(cmd, NULL, 16); > @@ -549,11 +549,7 @@ static void cb_download(struct usb_ep *ep, > struct usb_request *req) } else { > sprintf(response, "DATA%08x", download_size); > req->complete = rx_handler_dl_image; > - max = is_high_speed ? hs_ep_out.wMaxPacketSize : > - fs_ep_out.wMaxPacketSize; > - req->length = rx_bytes_expected(max); > - if (req->length < ep->maxpacket) > - req->length = ep->maxpacket; > + req->length = rx_bytes_expected(ep); > } > fastboot_tx_write_str(response); > }
I cannot apply this patch on temporary u-boot-usb/master branch (SHA1: e6c0bc0643e5a4387fecbcf83080d0b796eb067c). Could you apply your changes (from this patch) on top of newest u-boot-usb repo? -- Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot