Enable support for booting U-Boot image from filesystem instead of some
random offset on the SD card. This makes the board usable by putting the
u-boot.img to first partition of the SD card and writing the SPL this way:
$ dd if=SPL of=/dev/sdX seek=2 bs=512
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Stefano Babic <sba...@denx.de>
---
V2: Update the commit message to specify wandboard
Update the commit message dd command to write just the SPL
---
include/configs/wandboard.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 99f5c0c..fbce730 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -14,6 +14,8 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_EXT_SUPPORT
#include "imx6_spl.h"
#define MACH_TYPE_WANDBOARD 4412
--
2.7.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
